Page 1 of 2 12 LastLast
Results 1 to 10 of 14
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Feb 2010
    Posts
    218
    Rep Power
    0

    i have a small issue

    ive looked around and trying to find parts, for certain things.

    connector, and crimping tool.

    can someone please tell me what kind of connector the picture is and what tools i would need to create one.

    the white connector ontop i cant tell if it dst, a molex. i scoured the internet for a name or type of the connector. i need various sizes because the machine has few sizes inside.
    ink connector.jpg


    Thanks.

  2. #2
    Service Manager 1,000+ Posts
    i have a small issue


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Re: i have a small issue

    That is:

    Q1273-60245 - ISS to cartridge cable

    Have replaced a few over the years. 4000s / T/Z series. They're all the same. If you have an ink cartridge that keeps getting rejected.....replace this.

    Are you trying to MAKE this part? Sheesh. They are less than $10. Just buy from HP or a supplier.

  3. #3
    Senior Tech 100+ Posts
    Join Date
    Feb 2010
    Posts
    218
    Rep Power
    0

    Re: i have a small issue

    Quote Originally Posted by Lance15 View Post
    That is:

    Q1273-60245 - ISS to cartridge cable

    Have replaced a few over the years. 4000s / T/Z series. They're all the same. If you have an ink cartridge that keeps getting rejected.....replace this.

    Are you trying to MAKE this part? Sheesh. They are less than $10. Just buy from HP or a supplier.
    no, i am not trying to make the part, if you read my post i did say the top part, the white connector, i know what part this belongs to, i want to know the name of the connector.

    please read.

    i want to to know the name of the type of connector.

    thanks for not reading...

    Arcadian

  4. #4
    Service Manager 1,000+ Posts
    i have a small issue


    Join Date
    Feb 2010
    Posts
    1,987
    Rep Power
    75

    Re: i have a small issue

    Lance15 mistakenly looked for logic in your idiotic question.

  5. #5
    Senior member of CRS 2,500+ Posts
    i have a small issue

    ZOOTECH's Avatar
    Join Date
    Jul 2007
    Location
    Insane Diego, CA
    Posts
    3,366
    Rep Power
    102

    Re: i have a small issue

    Quote Originally Posted by Arcadian View Post
    ive looked around and trying to find parts, for certain things.

    connector, and crimping tool.

    can someone please tell me what kind of connector the picture is and what tools i would need to create one.

    ink connector.jpg


    Thanks.
    I think this is what Lance15 was replying to.
    "You can't trust your eyes, if your mind is out of focus" --

  6. #6
    Retired 10,000+ Posts
    i have a small issue

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,131
    Rep Power
    989

    Re: i have a small issue

    Picoblade connector system. If you knew anything about connectors you could have found this yourself. Molex is one of the top connector manufacturers.

    PicoBlade Connector System - Molex

  7. #7
    Service Manager 1,000+ Posts
    i have a small issue


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Re: i have a small issue

    I did not read it correctly. Apologizes. My mistake. I'm glad someone knew what kind of connector that was, though.

  8. #8
    Senior Tech 100+ Posts
    Join Date
    Feb 2010
    Posts
    218
    Rep Power
    0

    Re: i have a small issue

    Quote Originally Posted by slimslob View Post
    Picoblade connector system. If you knew anything about connectors you could have found this yourself. Molex is one of the top connector manufacturers.

    PicoBlade Connector System - Molex

    Thank you.

    well lance's effort was feeble, but nice try.

    and Thanks Slimslob.

    its close, but if you notice where the wire are exposed sort of a press on type, or pinching system. i saw the molex connector. it wasnt the same, as the picture.

    But thanks.

  9. #9
    Service Manager 1,000+ Posts
    i have a small issue


    Join Date
    Jun 2015
    Location
    Lutherville, MD
    Posts
    1,048
    Rep Power
    44

    Re: i have a small issue

    Sheesh!

    I admit I didn't read thoroughly and you continue to taunt me and others who tried to help you!!

    Slimslob was right on the money here with his post:
    If you knew anything about connectors you could have found this yourself.
    I'm done! Use your brains(?) and figure shit out on your own!

  10. #10
    Service Manager 10,000+ Posts
    i have a small issue

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,659
    Rep Power
    658

    Re: i have a small issue

    Quote Originally Posted by Lance15 View Post
    Sheesh!

    I admit I didn't read thoroughly and you continue to taunt me and others who tried to help you!!

    Slimslob was right on the money here with his post:

    I'm done! Use your brains(?) and figure shit out on your own!
    a user comes here.. doesn't really explain what's going on, several tried to help. MOST times the assembly doesn't list INDIVIDUAL part numbers, and WILL NOT LIST the part # of the connector AT ALL!

    the to BASH techs trying to help out is TOTALLY UNCALLED FOR.

    He already had one RED CARD thrown against him... he just might have a bigger collection of them before this is all said and done.

    We all have times when we don't: fully read OP's (and you Sir admitted it) or can't understand because the OP didn't express his problem properly. But for a user to bash you like he did ( he's been here since 2010 ) and with 162 posts NO REP POWER and has already acquired
    RED CARDS INDICATES (to me at least) he isn't willing to help others, and just is a leech of information.

    and no IMHO he isn't able to research on his own.

    and why the HELL is this thread located in " Rants n Raves " and NOT in the PARTS Room?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here