Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1. #1
    Senior Tech 100+ Posts
    Join Date
    Nov 2015
    Location
    archdale,nc
    Posts
    172
    Rep Power
    20

    General MFC question.

    Does anyone have a solution to prevent ink or whatever from sticking to the glass used for ADF copies/scans ? We have a few KonicaMinolta 4050i's that seem to do it more than other brands for whatever reason.
    Any tips ?
    Thanks,
    Dave

  2. #2
    Retired 10,000+ Posts
    General MFC question.

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,231
    Rep Power
    991

    Re: General MFC question.

    It only happens when the ink or correction fluid has not been allowed enough time to dry. Fluid ink pens are the worse.

    Any reason why you posted this in Rants Raves and Everything Else instead of the KM technical forum?

  3. #3
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,145
    Rep Power
    346

    Re: General MFC question.

    Quote Originally Posted by deputydogg View Post
    Does anyone have a solution to prevent ink or whatever from sticking to the glass used for ADF copies/scans ? We have a few KonicaMinolta 4050i's that seem to do it more than other brands for whatever reason.
    Any tips ?
    Thanks,
    Dave
    Yes train them it is in every user manual, if they want you to come onsite and clean glass instead make sure call is chargeable.
    I have not enough time to do stupid calls so if I ever appear to do it after I phoned and described what to clear and where to clear it is billed 100%
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  4. #4
    The Wolf 2,500+ Posts mojorolla's Avatar
    Join Date
    Jan 2010
    Location
    Cleveland OH
    Posts
    2,513
    Rep Power
    126

    Re: General MFC question.

    Anytime I take a dirty slit class call, or reloading paper I refer to it as a "job security call". Customers get a laugh, and it helps them remember their past mistakes and how to resolve them without my intervention.


    Failing to plan is planning to fail!!!

  5. #5
    Senior Tech 100+ Posts
    Join Date
    Nov 2015
    Location
    archdale,nc
    Posts
    172
    Rep Power
    20

    Re: General MFC question.

    Well I see it on other brands, Brother,HP,Toshiba,etc so I didn't want to post it in each forum but mainly I didn't want a visit from the "DENTIST"...


    Quote Originally Posted by slimslob View Post
    It only happens when the ink or correction fluid has not been allowed enough time to dry. Fluid ink pens are the worse.

    Any reason why you posted this in Rants Raves and Everything Else instead of the KM technical forum?

  6. #6
    Retired 10,000+ Posts
    General MFC question.

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,231
    Rep Power
    991

    Re: General MFC question.

    Quote Originally Posted by deputydogg View Post
    Well I see it on other brands, Brother,HP,Toshiba,etc
    If you wanted it to be viewed by the top tech for all brands you could have posted it in Copier Technical Discussions. https://www.copytechnet.com/forums/c...al-discussion/

    so I didn't want to post it in each forum but mainly I didn't want a visit from the "DENTIST"...
    Then you should not have posted it in Rants, Raves and Everything Else. The "DENTIST" posts here frequently.

  7. #7
    Senior Tech 100+ Posts
    Join Date
    Nov 2015
    Location
    archdale,nc
    Posts
    172
    Rep Power
    20

    Re: General MFC question.

    Quote Originally Posted by slimslob View Post
    If you wanted it to be viewed by the top tech for all brands you could have posted it in Copier Technical Discussions. https://www.copytechnet.com/forums/c...al-discussion/



    Then you should not have posted it in Rants, Raves and Everything Else. The "DENTIST" posts here frequently.

    Maybe I will post it there then, so as not to upset the DENTIST...

  8. #8
    Retired 10,000+ Posts
    General MFC question.

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,231
    Rep Power
    991

    Re: General MFC question.

    Quote Originally Posted by deputydogg View Post
    Maybe I will post it there then, so as not to upset the DENTIST...
    He is one of the top techs that checks there also.

  9. #9
    Service Manager 5,000+ Posts tsbservice's Avatar
    Join Date
    May 2007
    Posts
    7,145
    Rep Power
    346

    Re: General MFC question.

    Quote Originally Posted by deputydogg View Post
    Maybe I will post it there then, so as not to upset the DENTIST...
    Maybe it's time to concentrate on advices received on topic instead of whatever you talk... just saying
    A tree is known by its fruit, a man by his deeds. A good deed is never lost, he who sows courtesy, reaps friendship, and he who plants kindness gathers love.

    Blessed are they who can laugh at themselves, for they shall never cease to be amused.

    I don't reply to private messages from end users.

  10. #10
    Service Manager 10,000+ Posts
    General MFC question.

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,786
    Rep Power
    661

    Re: General MFC question.

    Quote Originally Posted by slimslob View Post
    He is one of the top techs that checks there also.
    Thanks brother

    Sent from my SM-G960U using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here