Hated Di151 and Di1610...
Also any A4 desk color mfp from KM like de c20, c25...
If you'd like a serious answer to your request:
1) demonstrate that you've read the manual
2) demonstrate that you made some attempt to fix it.
3) if you're going to ask about jams include the jam code.
4) if you're going to ask about an error code include the error code.
5) You are the person onsite. Only you can make observations.
blackcat: Master Of The Obvious =^..^=
Canon NP-6060? Took a lot of work to keep one running. Jammed a lot.
Canon IRC3100...hands down.
I've worked on plenty of crap machines during my 25 years in this business. When I was a Lanier tech back in the mid 90s, there was a Panasonic in their line that was horrible to work on. I don't remember the model number. Then, when I started on the Toshiba analogs, the 1550 ate everybody's lunch. Their first attempts at digital were miserable too. I hated anything with a model number starting with DP. The e-studio line was not bad, maybe because I had gotten used to Toshibas by then. The worst thing they ever did though, was the Toshiba-Oki hybrid from Hell. The e407CS color and e477S b/w series are service nightmares. Doc feeds with cheap gears that don't mesh well, drums and fusers that never reach their expected life, and any other thing that needs to be replaced takes half a day to get to it.
My vote is for the Ricoh 1224c/1232c
This week it is the HP P777 Pagewide injet A3 series. Launched buy HP two years ago to revolutionise the A3 copier market it failed spectacularly.
It only had half a brain, could never work out where the head cleaning sled was, and it didn't measure the length of the paper so it never knew when it had a paper jam.
The C/Q was awful, anybody that was "upgraded" to one was on the phone to the rep before the week was out asking for their old worn out laser back.
I notice that HP quietly stopped manufacturing them and hasn't announced a replacement.
At least 50% of IT is a solution looking for a problem.
Hi there!
Lagonda, you donīt know how RIGHT you are, but the A-4 pagewide-series is worse. Had to change a buchfull of this beasts during printhead-problems. If they making white stripes you can clean and clean - change the whole machine, cause for the most models there is no spare-printhead availible.
The new model for A-3 is called 77650. Itīs a little bit better, but quality prints arenīt much better. And the version with the extern finisher make all technicians laugh out loud (ever seen an ink-machine with a complete fuser????).
Greetings...
Bookmarks