Ricoh Aficio MP 6500 web motor

[Zoran]

Sorry Guys, but to post in a language others don't understand is just IMHO -= RUDE =-

When you're unplugging the transistor Q23 you have to watch the 3 nozzles of the transistor, the connection is fairly thin, it's going to burst.
In that case, switch the third nozzle of the transistor to the RICOH 14076759 processor.
It's best that an electrician do that to you

[slimslob]

why? hell I refuse to even press 3 for english on a phone call

You are aware that this is an international website?

[slimslob]

Sorry Guys, but to post in a language others don't understand is just IMHO -= RUDE =-

Therefore you must be rude since there are a lot of techs on this site who don't understand English.

[Vladika]

why? hell I refuse to even press 3 for english on a phone call

I'm sorry,
I only sad that I will try everything to try to fix that problem

[Yancula]

Svi strucnjaci na forumu ce ti reci da promenis bicu plocu a samo ja ti mogu reci kako da popravic do nivoa mikroelektronike evo ti neke slike sa prostora Srbije i Crne Gore za popravke bicu ploce

Zdravo Zoran.
Kad se promeni neki od ricoh 14076759, dali je potreban fw/sw za novi procesor?

[Zoran]

Zdravo Zoran.
Kad se promeni neki od ricoh 14076759, dali je potreban fw/sw za novi procesor?

Ne cip nema svoju memoriju radi samo izvrsne logicke naredbe , pokretanje motora logika senzora...Imam na stanju jos 4 cipa....

[mrwho]

I'm not a native english speaker, but I agree that we should all stick to a common language - if a solution is reached, it's best if everyone can benefit from it. And, since this is an english board, english should be that common language.

Here's where a moderator would come in handy...

[slimslob]

I'm not a native english speaker, but I agree that we should all stick to a common language - if a solution is reached, it's best if everyone can benefit from it. And, since this is an english board, english should be that common language.

Here's where a moderator would come in handy...

A moderator would make decisions based on the Forum Rules. There is no reference to a required language in the Forum Rules. Personally I would rather have someone who is not fluent in English post in whatever language he or she is comfortable than in broken English which is not translatable. I know how to use Google Translate.

[slimslob]

I'm not a native english speaker,

That explains why some of your posts are not clear.

[zoor]

Hello, I changed the web motor, the machine works normally untill I have changed the new cleaning web, I have tested the motor in output check mode, the motor doesn't work. What can cause that problem?

For web motor test purpose (if you have doubts about the BICU ) , charge cleaning motor connector is a option, just plug in and run SP 2803 ( Charge Cleaner Start Time ) . For some reason not listed in Output Check Mode