MPC 3003 SC 672-11

**fshead** · 07-29-2021

WHEN I get these sc672 and simple swap does not fix i will swap machine with another equal 03 and just gut the bad machine and
tag the boards just in emergency..
I cant spend on these types as it sets me back time and money

**fshead** · 07-29-2021

WHEN I get these sc672 and simple swap does not fix i will swap machine with another equal 03 and just gut the bad machine and<br>tag the boards just in emergency..<br>I cant spend on these types as it sets me back time and money

**copier tech** · 07-29-2021

Originally Posted by amishee

Hi guys,

Have a mpc 3003 with a sc 672-11.

Have replaced the ops panel, control board, nvram and hdd to no success, tried updating firmware but no luck. according to service manual these fixes should have cleared the fault but as of yet no luck.

does any one have any other options that i can take to get this machine up and running.

cheers

This is/was a known issue replace the USB cable with the modified type & update the firmware.

SC672 Solution.pdf

**slimslob** · 07-29-2021

Hey people, this was a 4 year old thread that some idiot grave robber chose to dig up when there are more recent post the idiot could have used. In fact he actually dug up 2 from 4 years ago. Some of the more recent, this year had the information wanted, a part number for the USB cable.

Now let it die and be buried again.

**copier tech** · 07-29-2021

Originally Posted by slimslob

Hey people, this was a 4 year old thread that some idiot grave robber chose to dig up when there are more recent post the idiot could have used. In fact he actually dug up 2 from 4 years ago. Some of the more recent, this year had the information wanted, a part number for the USB cable.

Now let it die and be buried again.

Yes, but this helps others with the same issue finding this thread & looking for a solution.