MP 7502 leading edge shift / Border Shift

**jsr123** · 04-09-2018

Dear All

MP - 7502 while copying from DF leading edge shifting. As per bottom edge also shifting.
sample copy attached for reference. From user tools edit margins set to all four zero. And
centre border to

1. Problem is erratic. 2. Copier is one year old with 150000 counter. 3. DF kit is new.

Thanks

**Zeldaman** · 04-09-2018

Hi there!
Look after the tension of the belts, dirt & old grease on the wheels driven by the belts (behind the 2 big motors ).
Greetings...

**jsr123** · 04-09-2018

Originally Posted by Zeldaman

Hi there!
Look after the tension of the belts, dirt & old grease on the wheels driven by the belts (behind the 2 big motors ).
Greetings...

Which motor. In DF Unit or drive side. Where ???

**slimslob** · 04-09-2018

Which is the lead edge? It could be jitter or the original not being held down at either the front or rear of the slit glass. Hard to tell without knowing the direction of travel.