the manual says a few things to try:
Color Registration
The automatic line position adjustment usually is done for a specified condition to get the best color prints.
Do the following if color registration shifts:
Do Auto Color Registration as follows to do the forced line position adjustment.
1. First do SP2-111-3.
2. Then do SP2-111-1.
To check if SP 2-111-1 was successful, watch the screen during the process. A message is
displayed at the end. Also, you can check the result with SP 2-194-10 to -12.also try the normall ACC or sp 3001-004 (full music) after cleaning the sensors
I HAVE TRIED ALL THAT BUT IT ENDS WITH SC-285-00
ANY SUGGESTIONS???
Bookmarks