Results 1 to 8 of 8
  1. #1
    Technician
    Join Date
    Jul 2018
    Posts
    45
    Rep Power
    0

    colour registration problem mp c8002

    the manual says a few things to try:
    Color Registration
    The automatic line position adjustment usually is done for a specified condition to get the best color prints.
    Do the following if color registration shifts:
    • Do “Auto Color Registration” as follows to do the forced line position adjustment.
    1. First do SP2-111-3.
    2. Then do SP2-111-1.
    To check if SP 2-111-1 was successful, watch the screen during the process. A message is
    displayed at the end. Also, you can check the result with SP 2-194-10 to -12.also try the normall ACC or sp 3001-004 (full music) after cleaning the sensors

    I HAVE TRIED ALL THAT BUT IT ENDS WITH SC-285-00
    ANY SUGGESTIONS???

  2. #2
    Field Supervisor 500+ Posts
    colour registration problem mp c8002

    totoro's Avatar
    Join Date
    Apr 2008
    Posts
    572
    Rep Power
    34

    Re: colour registration problem mp c8002

    If you have the manual : why are you looking up color registration problems instead of looking up sc 285-00 ? Looking up the sc code will give you much more specific causes and solutions.
    Totoro

  3. #3
    Service Manager 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Posts
    3,502
    Rep Power
    88

    Re: colour registration problem mp c8002

    SC285-00 D MUSIC error


    The results of MUSIC pattern reading failed 4 times while the machine is turned ON.

    Details:
    • When MUSIC fails 4 times while the machine is turned ON. (The count is cleared when the machine is turned OFF e.g. when entering sleep mode.)

    • TM sensor sampling error
    • Sensor LED adjustment error
    • Patch number error
    • Transfer belt flaw error
    • Main registration error
    • Sub registration error
    • Main scan magnification ratio error
    • Main scan magnification ratio deviation error
    • Belt flawed or smudged
    • Sensor smudged or defective
    • Pattern density defection
    • Cycle the machine off/on.
    • Replace the TM sensor.
    • Replace the belt.
    • Process control
    • Cleaning

    I'd go for dirty ID sensors or there's a problem with the belt.

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    May 2020
    Location
    Lagos
    Posts
    50
    Rep Power
    0

    Re: colour registration problem mp c8002

    Simple logic:
    Add toner to all developers (CMYK), force line adjustment. It'll work like magic. I had similar issues and did it and worked.

  5. #5
    Senior Tech 2,500+ Posts
    colour registration problem mp c8002

    mikadonovan's Avatar
    Join Date
    May 2008
    Location
    Indianapolis, Indiana
    Posts
    2,573
    Rep Power
    74

    Re: colour registration problem mp c8002

    Quote Originally Posted by Pixtech Frameworks View Post
    Simple logic:
    Add toner to all developers (CMYK), force line adjustment. It'll work like magic. I had similar issues and did it and worked.
    He's probably already fixed it. This is a 2 year old thread.
    NEVER ASSUME ANYTHING

  6. #6
    Trusted Tech 50+ Posts
    Join Date
    May 2020
    Location
    Lagos
    Posts
    50
    Rep Power
    0

    Re: colour registration problem mp c8002

    Yeah. Just a simple method if it happens again.

  7. #7
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    12,704
    Rep Power
    319

    Re: colour registration problem mp c8002

    Quote Originally Posted by Pixtech Frameworks View Post
    Simple logic:
    Add toner to all developers (CMYK), force line adjustment. It'll work like magic. I had similar issues and did it and worked.
    We don't like grave robbers.

  8. #8
    Field Supervisor 500+ Posts Zaxxon's Avatar
    Join Date
    Jan 2014
    Posts
    535
    Rep Power
    27

    Re: colour registration problem mp c8002

    Quote Originally Posted by mikadonovan View Post
    He's probably already fixed it. This is a 2 year old thread.
    No no he struggles to get the colors straight and perhaps not even aware of the CoronaVirus
    Please start you post with brand, model, problem.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here