Results 1 to 9 of 9

Thread: MP C4503

  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jun 2014
    Posts
    76
    Rep Power
    15

    MP C4503

    I have a Lanier MP C4503 that will not come out of energy saver mode. The customer is having to turn the machine off and then back on to get it running again. Doesn't matter if you let the machine go into energy saver mode or press the energy saver button, once it's asleep for a few minutes it locks up. Updated firmware to no avail, anybody else come across anything like this?

  2. #2
    Professional Moron 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Location
    Shitsville, UK
    Posts
    3,589
    Rep Power
    91

    Re: MP C4503

    Which frimwar have you updated?

  3. #3
    Trusted Tech 50+ Posts
    Join Date
    Jun 2014
    Posts
    76
    Rep Power
    15

    Re: MP C4503

    System/Copy, Engine, and Power Saving.

  4. #4
    Trusted Tech 250+ Posts Athlontini's Avatar
    Join Date
    Jun 2012
    Posts
    266
    Rep Power
    24

    Re: MP C4503

    Try flashing the full package firmware or update all the rest of them individually. The Firmware History mentions that the Fax, FCU and Network Support firmware also could have bugs that cause this problem.

  5. #5
    Senior Tech 100+ Posts aktasson's Avatar
    Join Date
    Feb 2017
    Location
    Stockholm
    Posts
    200
    Rep Power
    14

    Re: MP C4503

    Quote Originally Posted by 88hawkfan View Post
    I have a Lanier MP C4503 that will not come out of energy saver mode. The customer is having to turn the machine off and then back on to get it running again. Doesn't matter if you let the machine go into energy saver mode or press the energy saver button, once it's asleep for a few minutes it locks up. Updated firmware to no avail, anybody else come across anything like this?
    Have all been firmware files updated? Check smc sp-5-990-004 for unspecific sc codes. Nv-ram upload (backup), then Memory clear all - just for testing. If problem stays, nv-ram restore. Please upload the smc list here for diagnostic.

  6. #6
    Senior Tech 100+ Posts aktasson's Avatar
    Join Date
    Feb 2017
    Location
    Stockholm
    Posts
    200
    Rep Power
    14

    Re: MP C4503

    Quote Originally Posted by aktasson View Post
    Have all been firmware files updated? Check smc sp-5-990-004 for unspecific sc codes. Nv-ram upload (backup), then Memory clear all - just for testing. If problem stays, nv-ram restore. Please upload the smc list here for diagnostic.
    If you can't update the package firmware, you have to update all new rom data fw files first to update the package file. In case of older machines.

  7. #7
    Senior Tech 100+ Posts aktasson's Avatar
    Join Date
    Feb 2017
    Location
    Stockholm
    Posts
    200
    Rep Power
    14

    Re: MP C4503

    Quote Originally Posted by aktasson View Post
    If you can't update the package firmware, you have to update all new rom data fw files first to update the package file. In case of older machines.
    And check sleep mode timer as well...


    • Do the following if the customer would like to disable the Sleep Mode Timer or increase the timer length:
      Disable "Sleep Mode Timer"
      When this timer is disable and the name of Sleep Mode Timer is greyed out in User Tools, the machine does not enter the sleep mode.
      < >Set SP5-305-101 to a value of 0 to display Sleep Mode Entry by Sleep Timer setting on the User tools.
      Set the Sleep Mode Entry by Sleep Timer setting to "Disabled" in User Tools.Make sure that the Sleep Mode Timer is greyed out.
      Set SP5-305-101 to a value of 0.
    • Make sure that the Sleep Mode Entry by Sleep Timer setting is "Enable"
    • Select a setting between 1 to 240min.

  8. #8
    Trusted Tech 50+ Posts
    Join Date
    Jun 2014
    Posts
    76
    Rep Power
    15

    Re: MP C4503

    Updated all firmware, installed package firmware, cleared the NVRAM, and the mfp still locks up after it goes into energy saver mode. Hotline suggested controller and set SP 5191 to 0. I'll update after I've changed the SP.

  9. #9
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    15,310
    Rep Power
    424

    Re: MP C4503

    Quote Originally Posted by 88hawkfan View Post
    Updated all firmware, installed package firmware, cleared the NVRAM, and the mfp still locks up after it goes into energy saver mode. Hotline suggested controller and set SP 5191 to 0. I'll update after I've changed the SP.
    Package firmware only replaces those modules that are not at the current version. It will not repair corrupted firmware. That requires the use of individual modules.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here