Page 1 of 2 12 LastLast
Results 1 to 10 of 13
  1. #1
    Field Supervisor 500+ Posts tcypy1961's Avatar
    Join Date
    Feb 2009
    Location
    Pensacola, FL
    Posts
    771
    Rep Power
    38

    Ricoh MP4001 document feeder DF3010

    would it make any difference that this feeder misfeeds more when scanning to email than when scanning either to document server or scanning for copying??? The most common misfeed in the history log is 054. the two most common misfeed spots in SP7505 are -5 and -54 with more in -5 than -54. I've cleaned the pulleys and all paper sensors and the pads the sensors detect. After cleaning when I tried sending a stack of blank paper to an email account the feeder did act up but no misfeeds. I had to reboot copier to correct which is what customer says they have to do periodically. Feeder fed first sheet then no more but motor closest to left rear kept running for about 20 seconds then stopped???
    Thanks!!!
    I do know this feeder has a lot of misfeeds in between pm's.

  2. #2
    Service Manager 1,000+ Posts
    Ricoh MP4001 document feeder DF3010

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Rome, IT
    Posts
    1,299
    Rep Power
    68

    Re: Ricoh MP4001 document feeder DF3010

    [QUOTE = tcypy1961; 722448] farebbe la differenza che questo alimentatore si inceppi di più quando si esegue la scansione su e-mail rispetto a quando si esegue la scansione del documento server o la scansione per la copia ??? L'inceppamento più comune nel registro della cronologia è 054. i due più comuni punti di inceppamento in SP7505 sono -5 e -54 con più in -5 che -54. Ho pulito le pulegge e tutti i sensori di carta e le piastre rilevate dai sensori. Dopo la pulizia, quando ho provato a inviare una risma di carta bianca a un account di posta elettronica, l'alimentatore ha funzionato ma non si è verificato un errore di alimentazione. Ho dovuto riavviare la copiatrice per correggere quale è ciò che il cliente dice che devono fare periodicamente. Alimentatore alimentato prima foglio quindi non più ma il motore più vicino alla parte posteriore sinistra continuava a funzionare per circa 20 secondi, quindi si fermava ???
    Grazie!!!
    So che questo alimentatore ha molti problemi di alimentazione tra i pm. [/ QUOTE]

    ciao prova a controllare questo pezzo, si trova vicino l'asse del reverse roller, a volte si rompe B802 2231 Shaft:Reverserive:Press Fit

  3. #3
    Service Manager 10,000+ Posts
    Ricoh MP4001 document feeder DF3010

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,658
    Rep Power
    658

    Re: Ricoh MP4001 document feeder DF3010

    Quote Originally Posted by GIUBOSS View Post
    [QUOTE = tcypy1961; 722448] farebbe la differenza che questo alimentatore si inceppi di più quando si esegue la scansione su e-mail rispetto a quando si esegue la scansione del documento server o la scansione per la copia ??? L'inceppamento più comune nel registro della cronologia è 054. i due più comuni punti di inceppamento in SP7505 sono -5 e -54 con più in -5 che -54. Ho pulito le pulegge e tutti i sensori di carta e le piastre rilevate dai sensori. Dopo la pulizia, quando ho provato a inviare una risma di carta bianca a un account di posta elettronica, l'alimentatore ha funzionato ma non si è verificato un errore di alimentazione. Ho dovuto riavviare la copiatrice per correggere quale è ciò che il cliente dice che devono fare periodicamente. Alimentatore alimentato prima foglio quindi non più ma il motore più vicino alla parte posteriore sinistra continuava a funzionare per circa 20 secondi, quindi si fermava ???
    Grazie!!!
    So che questo alimentatore ha molti problemi di alimentazione tra i pm. [/ QUOTE]

    ciao prova a controllare questo pezzo, si trova vicino l'asse del reverse roller, a volte si rompe B802 2231 Shaft:Reverserive:Press Fit
    the post was in english ( required in CTN ) then you change the language ... WHY?

  4. #4
    Retired 10,000+ Posts
    Ricoh MP4001 document feeder DF3010

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,128
    Rep Power
    989

    Re: Ricoh MP4001 document feeder DF3010

    Quote Originally Posted by Phil B. View Post
    the post was in english required in CTN
    Can you provide the Forum Rules, General Rules number that covers this?

  5. #5
    Service Manager 1,000+ Posts
    Ricoh MP4001 document feeder DF3010


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    1,661
    Rep Power
    86

    Re: Ricoh MP4001 document feeder DF3010

    ciao prova a controllare questo pezzo, si trova vicino l'asse del reverse roller, a volte si rompe B802 2231 Shaft:Reverserive:Press Fit[/QUOTE]

    If you can't post in English, don't bother posting at all, Thank you for your support.


    Si vous ne pouvez pas publier en anglais, ne vous inquiétez pas du tout, merci pour votre soutien.

  6. #6
    Retired 10,000+ Posts
    Ricoh MP4001 document feeder DF3010

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,128
    Rep Power
    989

    Re: Ricoh MP4001 document feeder DF3010

    Quote Originally Posted by anothertech View Post
    ciao prova a controllare questo pezzo, si trova vicino l'asse del reverse roller, a volte si rompe B802 2231 Shaft:Reverserive:Press Fit
    If you can't post in English, don't bother posting at all, Thank you for your support.


    Si vous ne pouvez pas publier en anglais, ne vous inquiétez pas du tout, merci pour votre soutien.[/QUOTE]

    It seems that a number of people on this forum are starting to act like bigots!!!

  7. #7
    Service Manager 1,000+ Posts
    Ricoh MP4001 document feeder DF3010


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    1,661
    Rep Power
    86

    Re: Ricoh MP4001 document feeder DF3010

    It seems that a number of people on this forum are starting to act like bigots!!![/QUOTE]


    You have the right to your opinion.

    My opinion is "Don't go where the people speak one language and then start speaking to them in some other language."

  8. #8
    Field Supervisor 500+ Posts Zaxxon's Avatar
    Join Date
    Jan 2014
    Posts
    607
    Rep Power
    36

    Re: Ricoh MP4001 document feeder DF3010

    Quote Originally Posted by anothertech View Post
    It seems that a number of people on this forum are starting to act like bigots!!!

    You have the right to your opinion.

    My opinion is "Don't go where the people speak one language and then start speaking to them in some other language."[/QUOTE]

    只是我的话

    Please start you post with brand, model, problem.

  9. #9
    Service Manager 1,000+ Posts
    Ricoh MP4001 document feeder DF3010

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Rome, IT
    Posts
    1,299
    Rep Power
    68

    Re: Ricoh MP4001 document feeder DF3010

    I apologize with the forum I digitized the translator by mistake.

  10. #10
    Administrator 500+ Posts Aneurysm's Avatar
    Join Date
    Jan 2005
    Location
    New York
    Posts
    887
    Rep Power
    100

    Re: Ricoh MP4001 document feeder DF3010

    There are a couple mis-quoted replies on this thread so it's hard to make heads or tails out it but let's all try to be polite, there's no need to fight with other techs when it comes to fixing copiers. English is preferred for search engine and spam prevention reasons but I'm not gonna beat someone up for it, a simple reminder usually works fine.

    Thanks,
    Admin
    --
    Snap, Crackle, Aneurysm!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here