Results 1 to 9 of 9

Thread: SP5200S SC195

  1. #1
    Technician
    Join Date
    Jan 2016
    Posts
    40
    Rep Power
    17

    SP5200S SC195

    Hello, Sp5200s with SC195, serial data missing etc, Tried inputting serial number via SP and also SSP (they were already there) fitted new EEproms to BICU SC669-63 now, tried new NVRAM, (tried uploading info to SD card first on old NV no joy) Can anyone tell me what the prefix means on the SC669-63. manual does not cover -63, this might help me diagnose the fault more. Thankyou

  2. #2
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    2,339
    Rep Power
    80

    Re: SP5200S SC195

    i dont see no sub codes here.
    you sure the eprom went in correct.
    I ve never had any issues wth these except lower fuser rollers wrinkling and one wth please wait and not the HDD.

  3. #3
    Service Manager 2,500+ Posts
    SP5200S SC195

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    3,885
    Rep Power
    159

    Re: SP5200S SC195

    Quote Originally Posted by The_man View Post
    Hello, Sp5200s with SC195, serial data missing etc, Tried inputting serial number via SP and also SSP (they were already there) fitted new EEproms to BICU SC669-63 now, tried new NVRAM, (tried uploading info to SD card first on old NV no joy) Can anyone tell me what the prefix means on the SC669-63. manual does not cover -63, this might help me diagnose the fault more. Thankyou
    Telling us what led to the issue might help us more too...
    Did it just happen just out of the blue? Did you do something to try and fix another issue? Or did you find the machine in this condition?
    Sounds to me like the BICU may have been swapped without the original NVRam

  4. #4
    Technician
    Join Date
    Jan 2016
    Posts
    40
    Rep Power
    17

    Re: SP5200S SC195

    Quote Originally Posted by sandmanmac View Post
    Telling us what led to the issue might help us more too...
    Did it just happen just out of the blue? Did you do something to try and fix another issue? Or did you find the machine in this condition?
    Sounds to me like the BICU may have been swapped without the original NVRam

    Found device like this SC195 swapped eprom for new and board, this got rid of 195 but now comes up wrong model, reset as per fitting new eprom, no good, got into factory mode(143) and reinput serial number no good, going to another device tomorrow will check settings on this one as cannot find which model, pnp maintenance id values to put in, obvs destination in this case EU. Thanks.

  5. #5
    Technician
    Join Date
    Jan 2016
    Posts
    40
    Rep Power
    17

    Re: SP5200S SC195

    Quote Originally Posted by The_man View Post
    Found device like this SC195 swapped eprom for new and board, this got rid of 195 but now comes up wrong model, reset as per fitting new eprom, no good, got into factory mode(143) and reinput serial number no good, going to another device tomorrow will check settings on this one as cannot find which model, pnp maintenance id values to put in, obvs destination in this case EU. Thanks.
    Fixed, with another new NVram and ctrl board...!!!! Settings went in straight away now ok.......mystery..ps tried old board back in machine SC195....

  6. #6
    Junior Member
    Join Date
    Oct 2022
    Location
    Mendoza
    Posts
    2
    Rep Power
    0

    Re: SP5200S SC195

    Quote Originally Posted by The_man View Post
    Fixed, with another new NVram and ctrl board...!!!! Settings went in straight away now ok.......mystery..ps tried old board back in machine SC195....
    hello, my ricoh sp5200s have the same error SC195, i think the nvram data was erased,
    Could you please send the data from your nvram, so I can copy it to mine?

    sorry for my english, i am argentinian and a bit stupid

  7. #7
    Retired 10,000+ Posts
    SP5200S SC195

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: SP5200S SC195

    Quote Originally Posted by 1nt3rn3t? View Post
    hello, my ricoh sp5200s have the same error SC195, i think the nvram data was erased,
    Could you please send the data from your nvram, so I can copy it to mine?

    sorry for my english, i am argentinian and a bit stupid
    WON'T WORK. Serial number mismatch, engine data mismatch etc.

  8. #8
    Junior Member
    Join Date
    Oct 2022
    Location
    Mendoza
    Posts
    2
    Rep Power
    0

    Re: SP5200S SC195

    Quote Originally Posted by slimslob View Post
    WON'T WORK. Serial number mismatch, engine data mismatch etc.
    What if I modified the file from the computer, changing the serial numbers of the file?

  9. #9
    Retired 10,000+ Posts
    SP5200S SC195

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,126
    Rep Power
    989

    Re: SP5200S SC195

    Quote Originally Posted by 1nt3rn3t? View Post
    What if I modified the file from the computer, changing the serial numbers of the file?
    You have to buy a new NVram from Ricoh parts. It will require one SP entry at power up.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here