Results 1 to 5 of 5
  1. #1
    Service Manager 1,000+ Posts
    MP6001 with SR4030 finishe and punch, "empty punch container" message does not clear.

    Desert Rat's Avatar
    Join Date
    May 2008
    Location
    Valley of the Sun
    Posts
    1,089
    Rep Power
    44

    MP6001 with SR4030 finishe and punch, "empty punch container" message does not clear.

    The empty punch bucket message will not clear. I have cleaned the sensor and re-seated the connectors on the punch unit board and
    the finisher control board. I don't have my infra red sensor to check for the light.
    It has worked fine for almost a year
    Also I get a message about "cannot punch this size or way" I will have a closer look tomorrow.
    Has anyone else had any experience with the punch?

    Thanks

    DR

  2. #2
    Service Manager 1,000+ Posts
    Join Date
    Oct 2011
    Location
    Hunter Valley, NSW
    Posts
    1,020
    Rep Power
    57

    Re: MP6001 with SR4030 finishe and punch, "empty punch container" message does not cl

    See if you can check sensor in input mode.

  3. #3
    Senior Tech 250+ Posts tjvincent's Avatar
    Join Date
    Apr 2008
    Location
    Green Bay, WI
    Posts
    280
    Rep Power
    37

    Re: MP6001 with SR4030 finishe and punch, "empty punch container" message does not cl

    I had to replace the sensor on one.

  4. #4
    Service Manager 1,000+ Posts
    MP6001 with SR4030 finishe and punch, "empty punch container" message does not clear.

    Desert Rat's Avatar
    Join Date
    May 2008
    Location
    Valley of the Sun
    Posts
    1,089
    Rep Power
    44

    Re: MP6001 with SR4030 finishe and punch, "empty punch container" message does not cl

    I probably should've just stayed a little longer, but I was having trouble finding it in the book.
    and now I have located the information in the manual for the main frame.
    I think I'll have a look for the service manual for the punch. It is type 3260 B702.

    Thanks

    DR

  5. #5
    Just a tech 250+ Posts keithxxiii's Avatar
    Join Date
    Nov 2014
    Posts
    463
    Rep Power
    28

    Re: MP6001 with SR4030 finishe and punch, "empty punch container" message does not cl

    Had a tech support call last month on the same prob. It was the HP sensor of the punch unit. It turned out, the seat where the sensor is installed got deformed.
    Aye! Cut the crap

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here