Aficio mp 4000

[Phil B.]

saturday i happen something similar

clean the optics, but nothing, followed the copy but the triangle well.

lower the laser and clean up all etc mirrors, without removing them, eye.

better improvement

but since, lower the unit of the lens, remove the black plastic cover, and in the ccd there is a small glass, clean it, it was dirty.

the copy was spectacular

on another occasion it was the white plate that goes in the glass, it was yellow in some parts, I got white paint, paint, and voila.

Well.. he SAID HE cleaned optics... sorry didn't know I had to review the BASICS again to him.. but point made.

Sent from my SM-G960U using Tapatalk

[MIGUELMARCHENA]

Well.. he SAID HE cleaned optics... sorry didn't know I had to review the BASICS again to him.. but point made.

Sent from my SM-G960U using Tapatalk

And in the meantime, the milkman, the mailman and the black man make fun of you

[anothertech]

after cleaning the optics, did you run adjustments? and did you clean the scanner white plate?

What are these adjustments you speak of?

[jonhiker]

folks have a tendancy to lean on the left corner of the df... try adjusting that corner up

[Phil B.]

And in the meantime, the milkman, the mailman and the black man make fun of you

And you think I am fucking concerned? I don't give a rats ass what you or anyother puke feels/thinks about me.
Besides A.W. what does this have to do with the thread?


Sent from my SM-G960U using Tapatalk

[Mark Bbb]

Well.. he SAID HE cleaned optics... sorry didn't know I had to review the BASICS again to him.. but point made.

Sent from my SM-G960U using Tapatalk

but since, lower the unit of the lens, remove the black plastic cover, and in the ccd there is a small glass, clean it, it was dirty.


This was new info, it is not in the regular cleaning of the optics...

[Mark Bbb]

It could also be that the small ADF scanner glass is worn out, the surface of the glass is rough because of multi use and therefore not able to make a clear copy...

[MIGUELMARCHENA]

but since, lower the unit of the lens, remove the black plastic cover, and in the ccd there is a small glass, clean it, it was dirty.


This was new info, it is not in the regular cleaning of the optics...

Have you seen a car with the damaged engine dripping smoke?

Here all buses are like this

And this machine that I comment, is almost on the street, so the mirrors are filled with soot and, the glass of the ccd etc.

That is the reason to have to uncover this part

[Sage632]

Update...

My colleague was sent out to this mfp and has told me that it was just dirty glass on the laser unit...

Thanks for the help!