So a little update...
I replaced the entire drum unit to no avail.
I opened up the back of the mfp and watched the fly wheel turn with a few prints and noticed it would slip.
It was missing the set screw on the back of the drum shaft.
Not sure how a client got a machine without a set screw.
I put in the set screw and voila! It works.
Thanks for your help everyone.
-sAGe
Thanks for the update. This is what I was suggesting 2 weeks ago in post 5.
I know...
But when I pulled off the back of the mfp and opened the door I wrongly assumed that it would have all the parts it was supposed to
I feel dumb
Bookmarks