Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Mar 2010
    Posts
    329
    Rep Power
    23

    MP 4002 FAX Reduction not working

    Ricoh MP 4002 fax auto reduction is on but when it receives a legal size doc it prints on legal paper or if legal is not available it prints on 2 81/2 x 11's.

  2. #2
    IT Manager 1,000+ Posts bsm2's Avatar
    Join Date
    Feb 2008
    Location
    Florida
    Posts
    1,613
    Rep Power
    42

    Re: MP 4002 FAX Reduction not working

    Some machines the setting change will not change until you reboot machine. unplug it for 30 seconds and power it back up

    Also check
    Fax Tray Prty.


    With the same size of paper loaded into multiple trays, you can make the machine use one tray for one function and another tray for another function.


    For example, you may load white A4 paper into tray 1 to use when making copies, and yellow A4 paper into tray 2 to use when printing received faxes. You can then easily identify for which purpose paper has been output.


    Tray 1


    Tray 2


    Bypass Tray


    Auto


    If you enable this function, received documents are printed on the sheet that has the highest priority.


    The default setting is “Tray 1”.

  3. #3
    Just a tech 250+ Posts keithxxiii's Avatar
    Join Date
    Nov 2014
    Posts
    351
    Rep Power
    16

    Re: MP 4002 FAX Reduction not working

    Recheck the parameter settings switch 10 bit 3
    Aye! Cut the crap

  4. #4
    Senior Tech 250+ Posts
    Join Date
    Mar 2010
    Posts
    329
    Rep Power
    23

    Re: MP 4002 FAX Reduction not working

    Everything is set correctly. The only additional info is that this problem occurs when jobs are sent via fax servers. It's not just one fax server it is multiple fax servers. I can not say it is all fax servers but at least 5 or 6.

  5. #5
    Geek Extraordinaire 2,500+ Posts KenB's Avatar
    Join Date
    Dec 2007
    Location
    Cleveland, Ohio
    Posts
    3,086
    Rep Power
    78

    Re: MP 4002 FAX Reduction not working

    I would suspect the fax server is sending extra blank lines, not allowing the MFP to properly reduce.

    I had a similar issue a few years ago, but I was supporting the RightFax server, not the MFP side.

    There were a handful of MFPs that had all kinds of receive issues; I asked but never did get answers about the makes and models, although I suspect they were all the same, as it was multiple locations for the same company.

    Turned out that the fax modem that RightFax was using needed a firmware update. There was a compatibility issue between it and only certain fax devices.
    Some days you’re the dog, some days you’re the fire hydrant.

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here