Thanks Thanks:  0
Dislikes Dislikes:  0
Results 1 to 5 of 5
  1. #1
    Technician reglanet's Avatar
    Join Date
    May 2018
    Location
    AA
    Posts
    26
    Rep Power
    4

    Machine does not connect with fiery

    I am having a connection problem between a fiery E-41A and Ricoh PRO C651.
    Reinstall the system on the Fiery, from the original disks.
    The fiery is connected to the machine and a router and the upper bar appears on the screen where it indicates active.
    I send ping from another machine to the fiery and respond normally.
    I turn on the machine, I wait until the screen is "ready" and then I turn on the fiery, until I load the system.
    The problem is that when you want to connect the machine to the fiery with the "FieryDriven" bonton, it stops at "Loading, please wait ..." and does not connect to the fiery.
    Can someone help me that I can be wrong?

  2. #2
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    9,866
    Rep Power
    218

    Re: Machine does not connect with fiery

    How do you currently have them connected together? Both should have 2 Ethernet connection, one standard CAT4 jack for connecting to the network and one giga-bit port for connecting the two together. Be sure to follow the directions in the service manual for configuring the giga-bit connection.

  3. #3
    Technician reglanet's Avatar
    Join Date
    May 2018
    Location
    AA
    Posts
    26
    Rep Power
    4

    Re: Machine does not connect with fiery

    2019.jpeg
    I have only one connection in that port and from there to the fiery, in the connection below that indicates the machine.

    Quote Originally Posted by slimslob View Post
    How do you currently have them connected together? Both should have 2 Ethernet connection, one standard CAT4 jack for connecting to the network and one giga-bit port for connecting the two together. Be sure to follow the directions in the service manual for configuring the giga-bit connection.

  4. #4
    Technician reglanet's Avatar
    Join Date
    May 2018
    Location
    AA
    Posts
    26
    Rep Power
    4

    Re: Machine does not connect with fiery

    The machine was working fine, I disconnected everything to move it and when I reconnected I could not make it connect to the fiery. I have also tried different cables UTP.


    Imagen1.jpgImagen2.jpg
    Last edited by reglanet; 09-20-2019 at 12:44 AM. Reason: add information

  5. #5
    Service Manager 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Posts
    3,380
    Rep Power
    80

    Re: Machine does not connect with fiery

    I can't tell from the picture if that network cable is plugged into the groundworks NIC or the gigabit NIC optionally fitted to the controller. Do you have a "00" on the vox display on the rear of the Fiery?
    Computers are serious tools, Michael!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here