Dislikes:
0
-
Technician
- Rep Power
- 11
Pro 8100 SC720-39
Good afternoon, I have been reading on the forum the problem of SC720-39.
My machine jumps once a week and that is when they make many stapled prints.
I have greased and cleaned SR-5050 and the code appears every week.
Someone has the same problem and how did you solve it?
Thanks for your help.
-
Re: Pro 8100 SC720-39
Bulletin D734-016.pdfFinisher Firmware History.pdf
Check these, one is a possible interlock SW problem, and the other is a hit in the firmware history.
-
Technician
- Rep Power
- 11
Re: Pro 8100 SC720-39
Ok, I will replace the microswitch and tell you the result.
Thank you
-
Technician
- Rep Power
- 11
Re: Pro 8100 SC720-39
ok, for the moment everything is going well apart from continuous jams in J114.
-
Re: Pro 8100 SC720-39
J114, finisher stack output error
-
Technician
- Rep Power
- 30
Re: Pro 8100 SC720-39
if i remember this problem correctly........try reducing the number of pages in the prestack. Default is 6
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks