Results 1 to 5 of 5
  1. #1
    Junior Member crisinjomi's Avatar
    Join Date
    Feb 2019
    Location
    Spain
    Posts
    7
    Rep Power
    0

    Pro 8100 SC720-39

    Good afternoon, I have been reading on the forum the problem of SC720-39.
    My machine jumps once a week and that is when they make many stapled prints.
    I have greased and cleaned SR-5050 and the code appears every week.
    Someone has the same problem and how did you solve it?
    Thanks for your help.

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    786
    Rep Power
    36

    Re: Pro 8100 SC720-39

    Bulletin D734-016.pdfFinisher Firmware History.pdf

    Check these, one is a possible interlock SW problem, and the other is a hit in the firmware history.

  3. #3
    Junior Member crisinjomi's Avatar
    Join Date
    Feb 2019
    Location
    Spain
    Posts
    7
    Rep Power
    0

    Re: Pro 8100 SC720-39

    Ok, I will replace the microswitch and tell you the result.
    Thank you

  4. #4
    Junior Member crisinjomi's Avatar
    Join Date
    Feb 2019
    Location
    Spain
    Posts
    7
    Rep Power
    0

    Re: Pro 8100 SC720-39

    ok, for the moment everything is going well apart from continuous jams in J114.

  5. #5
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    9,717
    Rep Power
    213

    Re: Pro 8100 SC720-39

    J114, finisher stack output error

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here