Hello All,
Thanks to everyone I got my 907 to go after replacing the toner pump. But now I have a no print issue.
The printer goes through all the motions and just delivers a blank page. There are no errors.
I am not sure were to go with this one.
Hello All,
Thanks to everyone I got my 907 to go after replacing the toner pump. But now I have a no print issue.
The printer goes through all the motions and just delivers a blank page. There are no errors.
I am not sure were to go with this one.
Sounds like maybe there's an issue with something not being grounded?
I know sometimes i forget to turn the transfer belt lever to make contact with the pcu's on the smaller machines and it delivers a blank page...Not very familiar with that particular model but just thought i'd suggest that.
I had this problem at my costumers machine pro1107ex.
The gear in the development motor was stuck because the spring that was behind the gear didn't pull back the gear.
Let's go back to basics here. What are your values for vsg and vsp? Is there toner\developer in the developer unit. Do you get an image on the drum doing a panic stop. So many varibles.
Totoro
Are you looking at the right side of the paper?
Please start you post with brand, model, problem.
Might be double sheeting.
19145933_1928613684053959_2336658053241415056_n.jpg this is traditional game play in my country. that feel happens to any technician who push drum.developing unit in position.developing motor have metal cam get rusty.he push unit as picture illustration and then metal cam pull back. after that developing unit not moving.conclusion to that situation. customer will arrest yo in his office until yo get clue
Bookmarks