Results 1 to 6 of 6

Thread: Spc431 fuser

  1. #1
    Impulse Drive Engineer 250+ Posts CableGuy's Avatar
    Join Date
    Oct 2008
    Location
    Portsmouth via Cape Town
    Posts
    417
    Rep Power
    27

    Spc431 fuser

    Hi All
    Does anyone know if a SPc431 fuser unit would work in a MPc300?
    We're having an error of SC555. Thermistors have been replaced.
    The price of the copier replacement unit is silly
    Many Thanks

  2. #2
    Retired 5,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    9,872
    Rep Power
    218

    Re: Spc431 fuser

    The first thing I would do when replacing the thermistors does not correct a fusing error is to check the thermostats.

  3. #3
    Service Manager 2,500+ Posts
    Spc431 fuser

    sandmanmac's Avatar
    Join Date
    Feb 2009
    Location
    Toronto, ON
    Posts
    2,992
    Rep Power
    89

    Re: Spc431 fuser

    Quote Originally Posted by CableGuy View Post
    Hi All
    Does anyone know if a SPc431 fuser unit would work in a MPc300?
    We're having an error of SC555. Thermistors have been replaced.
    The price of the copier replacement unit is silly
    Many Thanks
    I saved this from a thread from several years ago and have done it a couple of times myself ( I wish I could give credit where the credit is due):
    Fusing Unit: Two things are required:

    • Change the side cover (one has ‘ribs’ the other is plain)
    • Remove the large cover over the fuser connector. Unscrew the connector to free the harness and turn it over. The 9 pin connector on the printer version has 2 shorting loops, but on the mpc300 has 3 loops. Swap the connectors and away you go!

  4. #4
    Senior Tech 100+ Posts
    Join Date
    Jul 2008
    Posts
    161
    Rep Power
    26

    Re: Spc431 fuser

    Quote Originally Posted by sandmanmac View Post
    I saved this from a thread from several years ago and have done it a couple of times myself ( I wish I could give credit where the credit is due):
    Fusing Unit: Two things are required:

    • Change the side cover (one has ‘ribs’ the other is plain)
    • Remove the large cover over the fuser connector. Unscrew the connector to free the harness and turn it over. The 9 pin connector on the printer version has 2 shorting loops, but on the mpc300 has 3 loops. Swap the connectors and away you go!
    This. I do it all the time when I have to have a whole Fuser. Typically rebuild them but sometimes it's necessary to replace..

    Sent from my LM-V405 using Tapatalk

  5. #5
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,593
    Rep Power
    47

    Re: Spc431 fuser

    Quote Originally Posted by CableGuy View Post
    Hi All
    Does anyone know if a SPc431 fuser unit would work in a MPc300?
    We're having an error of SC555. Thermistors have been replaced.
    The price of the copier replacement unit is silly
    Many Thanks
    yes
    i do it all the time.............
    swap connector with 3 jumpers and plastic guide on the side...
    I tried to gut a few connector to make jumpers but they are very small pins...
    I have a bulk of spc430/c431/c440 [parts and they save me $$$$$

  6. #6
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,593
    Rep Power
    47

    Re: Spc431 fuser

    SRRY DIDNT see SANDYS REPLY............

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here