Originally Posted by
MichaelMalak
Thank you so much for helping me
The error message is most likely a post script sd card that was installed on the controller. If it came from another machine it will produce this error.
I will check the Ethernet port
As for the printing. Check the ethernet port. I have had it before that it was damaged by someone inserting a usb cable into the slot and bending all the ethernet contact pins out of position.
Can you please tell me how to do that? I mean which SP code to do that?
And if I did that will not cause the settings for use the machine as a copier and print from flash memory as I do now?
If you can access service mode try resetting the settings under memory clear for prt, mirs, ics, ucsc and anything that looks remotely like network.
It used to help on mp171sp with usb issues.
How can I do and check that? which SP code? and if range is on do I have to make it off?
If the pins are not bent on the ethernet port, access control range maybe turned on, which will cause devices outside the set range not being able to "see" or connect to your printer.
I appreciate your help so much
Thank you
Bookmarks