What happens if you reduce the image?
Sent from my SM-G930F using Tapatalk
What happens if you reduce the image?
Sent from my SM-G930F using Tapatalk
Here is another test with and without the slit glass.Slit test.jpg
Remove the slit glass???
Sent from my SM-G930F using Tapatalk
Yup! I was just checking at first to see if it was dirty causing the issue. Full image @ 93%.
What you are seeing is edge erase. If the paper in your attached photo is ran SEF, short edge feed, adjust SP 2103-001 Leading edge erase and SP 2103-002 trailing edge erase. For LEF, long edge feed, adjust SP 2103-003 and 004.
Erase margins are set to default.
Is the slit glass the original glass? In the pictures you sent with the two images one with glass and without. You can see with the glass the image is faint and without its darker. This shouldn't happen. Is the laser clean inside? What about printing a non default page and checking settings to see if anythings out
Sent from my SM-G930F using Tapatalk
Not the original slit glass. The "slit glass" or "dust cover glass" for the laser that you pull out to clean. Also, pulled the cover on the laser unit and checked to see if the mirrors were clean and they were. Printed non-default and settings look to be acceptable.
Hai sempre fornito assistenza con questa macchina? Il problema si è presentato all'improvviso o dopo una sostituzione? dalla foto vediamo che l'immagine ad un certo punto in cui diventa bianca è come un'altra stampa molto più piccola e spostata come se fosse compressa, non è esclusa l'elaborazione di un'immagine sbagliata. Prova i cavi che collegano il laser alla scheda, se puoi fare dei test con un'altra macchina funzionante sarebbe l'ideale.
Bookmarks