Thanks: 
Likes: Have you checked the screw on the drum flange on the rear of the machine that connects the Flywheel to the drum shaft. it sometimes falls out?
Dislikes: 0
Have you checked the screw on the drum flange on the rear of the machine that connects the Flywheel to the drum shaft. it sometimes falls out?
I think it is jamming because of an other problem that creates an SC code.
So, it is not the jamming that is the problem, jamming is a sympton of a bigger problem.
But it is weird that this SC code doesn't seem to appear!
Poligon motor solve all problem now everything is okOriginally Posted by Mark Bbb
hi
all paper jam in ricoh have a code for example (j015 jam in fusing)
this code is in your machine displays right upper side when jamming
it so important for any paper jam
you can tell me on my whatssapp to give you jam list
hi
all paper jam in ricoh have a code for example (j015 jam in fusing)
this code is in your machine displays right upper side when jamming
it so important for any paper jam
you can tell me on my whatssapp to give you jam list
+905466073346
The problem was solved a week ago. This is the second time today where I have seen you leave a reply obviously without reading the entire thread.
FYI, you are in violation of Forum General Rule 6 "Please wait a reasonable amount of time before bumping posts. Multiple or repeated posting in order to increase your post count is not allowed." You should have just edited your first reply.
Reply With Quote
Bookmarks