Page 1 of 2 12 LastLast
Results 1 to 10 of 20
  1. #1
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,593
    Rep Power
    47

    jam 056 on mp6002


    hi
    Anyone have any issues with some 056 jams on mp6002?
    I had one jamming at the transport and at the reg roller and pulled drum,dev unit and then
    the sensor at the reg roller that gets dusted wth paper dust and ran it and had no problems.
    Customer called a few days later and said it was jamming again..

  2. #2
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,593
    Rep Power
    47

    Re: jam 056 on mp6002


    I just double checked manual and 056 jam shows for JAPAN only?
    4th Paper Feed SN: Lag (Japan Only)



  3. #3
    Technician
    Join Date
    Mar 2016
    Posts
    22
    Rep Power
    8

    Re: jam 056 on mp6002

    Could they have told you the wrong area? 056 can also be an ADF registration jam.

  4. #4
    Service Manager 1,000+ Posts
    jam 056 on mp6002

    guitar9199's Avatar
    Join Date
    Sep 2016
    Location
    Eveleth, MN
    Posts
    1,009
    Rep Power
    30

    Re: jam 056 on mp6002

    If you're seeing paper make it all the way to the duplex diverter before crashing, you may have a broken Guide Plate Lever. It pushes the guide plate over to the left so paper can enter the duplex and head back to the exit section. I've had a couple of them break on me, so they don't hold the guide plate over far enough.

    Pull the D2 section out, and see if that plate lever moves on the shaft freely. If it does, that's likely your issue.

    Part Number D1314421

  5. #5
    Trusted Tech 50+ Posts
    Join Date
    Jul 2015
    Posts
    84
    Rep Power
    9

    Re: jam 056 on mp6002

    What I have seen cause it is usually the 4th tray is set for 11x17 paper and it is empty. And some wingnuts sticks
    8 1 x 2 x11 paper in there.

  6. #6
    Senior Tech 100+ Posts
    jam 056 on mp6002

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Roma
    Posts
    108
    Rep Power
    15

    Re: jam 056 on mp6002


  7. #7
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,593
    Rep Power
    47

    Re: jam 056 on mp6002

    Quote Originally Posted by illude2 View Post
    Could they have told you the wrong area? 056 can also be an ADF registration jam.
    thanks.
    it is a copier 056 jam.
    I dont why manual says 4th paper tray JAPAN only.
    As I SEE these machines you have the top lettertandem tray 1 and the lower tray 2 and tray 3...NO TRAY 4??

  8. #8
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,593
    Rep Power
    47

    Re: jam 056 on mp6002

    Quote Originally Posted by MIKON View Post
    What I have seen cause it is usually the 4th tray is set for 11x17 paper and it is empty. And some wingnuts sticks
    8 1 x 2 x11 paper in there.
    Here in USA there is no tray 4..Now I know you can add a external paper deck..but on this machine it is plain..

  9. #9
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,593
    Rep Power
    47

    Re: jam 056 on mp6002

    Quote Originally Posted by guitar9199 View Post
    If you're seeing paper make it all the way to the duplex diverter before crashing, you may have a broken Guide Plate Lever. It pushes the guide plate over to the left so paper can enter the duplex and head back to the exit section. I've had a couple of them break on me, so they don't hold the guide plate over far enough.

    Pull the D2 section out, and see if that plate lever moves on the shaft freely. If it does, that's likely your issue.

    Part Number D1314421
    Thanks
    I think the only jams were at the reg roller or at the vertical transport..
    I was short on time so I just pulled drum,dev unit and guide above reg roller to clean that sensor
    and checked fuser and top paper tray for broken side fence or bent rear metal from slapping in full reams of paper
    with heavy hand...All was good and i ran full smc reports twice and then thru adf and no jams..

  10. #10
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,593
    Rep Power
    47

    Re: jam 056 on mp6002

    Quote Originally Posted by guitar9199 View Post
    If you're seeing paper make it all the way to the duplex diverter before crashing, you may have a broken Guide Plate Lever. It pushes the guide plate over to the left so paper can enter the duplex and head back to the exit section. I've had a couple of them break on me, so they don't hold the guide plate over far enough.

    Pull the D2 section out, and see if that plate lever moves on the shaft freely. If it does, that's likely your issue.

    Part Number D1314421
    hi
    just out of curiosity i tried to find that part on my parts manual,just so i can eliminate it upon visit.
    is that in the duplex part of manual or beneath fuser itself?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here