Likes:
0
Dislikes:
0
-
Technician
- Rep Power
- 18
Ricoh MP 9002 folding corners when duplexing
Fuser has been rebuilt not to long ago. I replaced the duplex solenoid and feed gate at entrance to the duplex tray.
It worked fine for a while and now it's bending the corners again. Not every time, but pretty much.
-
Re: Ricoh MP 9002 folding corners when duplexing
Check the plastic rib on the lower transport guide plate of the duplex unit where that corner of the paper rides going through. I have seen the paper wear a notch in the rib and either cause bent corners or jamming. You can usually smooth it with sand paper.
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks