Hello Everyone

My client has acquired this Ricoh MPC4503 with a Fiery Rip installed. The plan was for me to remove the Fiery and plug it in directly to their network as they have no need for such software. So, I removed the extra fiery network card and set SP 5193-001 back to 0. The machine will not print. I can ping it, and log in as Administrator but I can not get it to print. I can send it a test page from the print driver and all it says is that it failed to print. Is there something else that needs to be reconfigured in SP mode to allow it to print again?
Thanks in advance.

Regards

Fuzzy