Originally Posted by
Phil B.
Wow Brother.. do we need Jcodes?
Isn't your crystal ball plugged in?
have you lost your "Carnac the Magnificent" abilities ?
I wonder if they go to their Dr. so well prepared and BP - HR - Weight Height - A1C counts ....?
I know.. they go to the CAR doc and say " It just doesn't run right" !!!
Whiskey Tango Foxtrot!??
"...I have problem with one Ricoh pro 1356 .Machine and Finisher (sr5000) works very fine but when job end or paper end during the job machine shows paper jam on finisher exit part .There is no paper in the finisher open and close the front door error for paper jam is cleared .
Any suggestions for this problem thanks ."
ummm I'm only a simple country mage.. but:
Like master Slimslob said JAM CODE?
how can " works very fine but...."?
*HUH??
paper jam on finisher exit part
*ok WHAT PART? Can you post the . JAM EXIT area?
1) Do the paper properties (size and type) on the Copier for all Trays match: a) Display Screen b) printer device settings c) file properties (ASSuming you ARE printing ** which you didn't mention**
2) ASSuming this machine has had this problem for a bit, did you: a) Confirm no scraps stuck in paper path 2) ALL sensors are operating properly c) You can confirm #1 are all set properly?
3) Can you print out the SMC report to tray other than finisher? PLEASE DO.
4) Tech/IT/EndUser?
5) Have Service Manual?
PhilB. "The Dentist"
Bookmarks