Part number for 2X10MM PIN for a Ricoh 4055

[Trommel]

Hi there,

I need a 2X10MM PIN for a Ricoh 4055 development unit (red part see attachment). There's no PN in the 3D parts, it probably comes with the whole unit. Does anybody know if there's a seperate PN. Otherwise I'll just get a generic one from the internet. I don't think it matters that much.

Thanks.

Best regards,
Trommel

[FrohnB]

Not able to locate it in the parts manual either. Local Hardware store may have one. I've used "Tension Pins/ Roll Pins" (readily available at hardware stores) in place of solid pins before.

[GIUBOSS]

look for a small nail and cut it to size. I believe it is not necessary to look for the exact replacement

[slimslob]

look for a small nail and cut it to size. I believe it is not necessary to look for the exact replacement

Could introduce some vibration.