code mp 6001 sc878

[GIUBOSS]

Before turning off the machine from the main switch, make sure that the
operating button is not lit or flashing. If the machine is turned off
from the main switch while the LED is on or flashing it could
damage the hard disk or flash memory.

[slimslob]

When the machine is ready after boot if the operator turns it off from the main switch
without pressing the auto-off button on the keyboard (right side) the NAND flash
memory on the controller could be damaged and originate the code SC878.

Before turning off the machine from the main switch, make sure that the
operating button is not lit or flashing. If the machine is turned off
from the main switch while the LED is on or flashing it could
damage the hard disk or flash memory.

Then the question becomes what happens if there is a sudden power outage?

[fidyas]

Control is very expensive in my country. If you want to help me, give me the software file, this is what I need