Results 1 to 9 of 9
  1. #1
    Senior Tech 250+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    308
    Rep Power
    0

    2018, 2000, 2501 etc

    At this series of machines whan paper jam occurs at fusing , paper press upper picker fingers up and displace them.
    When client removes jammed paper fingers remain displaced and he has to press them down to brink then at the right position.
    Usually after some times the plastic that holds finger in position brakes and have to replace the upper part of fusing unit.
    Is there any other way to place fingers in place ?

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Oct 2011
    Location
    Sydney
    Posts
    665
    Rep Power
    30

    Re: 2018, 2000, 2501 etc

    Update to a newer machine.

  3. #3
    Senior Tech 250+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    308
    Rep Power
    0

    Re: 2018, 2000, 2501 etc

    When customer makes up to 30 copies per day is difficult to convice him to replace it.

  4. #4
    Trusted Tech 50+ Posts 8T2's Avatar
    Join Date
    Aug 2015
    Location
    Secunda, Mpumalanga
    Posts
    63
    Rep Power
    10

    Re: 2018, 2000, 2501 etc

    I usually bend the spring plate that holds the white plastic roller down a bit to put more pressure on pawl. Not too much though otherwise you shorten the hot roller life.

    Updated pawl ass'y D1584043 seems to be working beter than the initial pawl design too but bend the plate slightly on them anyway as a precaution...and the pawl attaches to the plate and not the fuser case so no more rebuilding fusers because the case broke where the pawls seat

    *Edit D1584043 comes with redesigned pawl, plate and spring. Only the white plastic roller needs to be ordered seperate

    Sent from my WAS-LX1 using Tapatalk

  5. #5
    Ricoh Fanboy 1,000+ Posts Oze's Avatar
    Join Date
    Jul 2008
    Location
    Toowoomba,QLD
    Posts
    1,467
    Rep Power
    46

    Re: 2018, 2000, 2501 etc

    Also...there's a easy mod for the white guide rollers.
    Remove them one at a time and bend the metal "leaf springs" down to put more pressure on the pawls.

  6. #6
    Service Manager 2,500+ Posts
    2018, 2000, 2501 etc

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    4,010
    Rep Power
    76

    Re: 2018, 2000, 2501 etc

    Quote Originally Posted by Gab View Post
    At this series of machines whan paper jam occurs at fusing , paper press upper picker fingers up and displace them.
    When client removes jammed paper fingers remain displaced and he has to press them down to brink then at the right position.
    Usually after some times the plastic that holds finger in position brakes and have to replace the upper part of fusing unit.
    Is there any other way to place fingers in place ?

    The secret is to address why its jamming in the fuser, usually damp/poor quality paper or the lead edge is too small.
    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  7. #7
    Senior Tech 100+ Posts
    2018, 2000, 2501 etc

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Roma
    Posts
    237
    Rep Power
    18

    Re: 2018, 2000, 2501 etc

    Quote Originally Posted by 8T2 View Post
    I usually bend the spring plate that holds the white plastic roller down a bit to put more pressure on pawl. Not too much though otherwise you shorten the hot roller life.

    Updated pawl ass'y D1584043 seems to be working beter than the initial pawl design too but bend the plate slightly on them anyway as a precaution...and the pawl attaches to the plate and not the fuser case so no more rebuilding fusers because the case broke where the pawls seat

    *Edit D1584043 comes with redesigned pawl, plate and spring. Only the white plastic roller needs to be ordered seperate

    Sent from my WAS-LX1 using Tapatalk
    the white plastic roller old are the same.

  8. #8
    Senior Tech 100+ Posts
    2018, 2000, 2501 etc

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Roma
    Posts
    237
    Rep Power
    18

    Re: 2018, 2000, 2501 etc

    check that the nail supports are not broken, otherwise make changes as described in 8T2, or replace the fuser roller, stripper pawls, springs and pressure bushings

  9. #9
    Trusted Tech 50+ Posts 8T2's Avatar
    Join Date
    Aug 2015
    Location
    Secunda, Mpumalanga
    Posts
    63
    Rep Power
    10

    Re: 2018, 2000, 2501 etc

    Quote Originally Posted by GIUBOSS View Post
    the white plastic roller old are the same.
    Yes they stayed the same.

    Sent from my WAS-LX1 using Tapatalk

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here