SPC 830 DRUM/DEV UNIT

[fshead]

HI
I know this might be discussed before but I dont remember the answer.
If I want to use a mpc3002 drum unit on the SPC830DN PRINTER is it just the drum face cover
or do i have to swap out the TD sensor too..
I use to have a shop SPC830 but sold it and I dont see too many of these.
thanks

[GIUBOSS]

if I remember correctly, just cut a piece of the part where there is a metal inside the RJ45 to insert it

[fshead]

if I remember correctly, just cut a piece of the part where there is a metal inside the RJ45 to insert it

thanks but i thought that cutting the corner was for swapping K DRUM FOR COLOR

[slimslob]

Attached is the cheat sheet for modifications needed to use certain PCUs in others models. The modifications might also apply to the SPC 830.

B2C_Drum_Cheat_Sheet_v2[1].pdf

[fshead]

I know I had a full set,low meter SPC830 I pulled but danm if i can find them.............

[copier tech]

HI
I know this might be discussed before but I dont remember the answer.
If I want to use a mpc3002 drum unit on the SPC830DN PRINTER is it just the drum face cover
or do i have to swap out the TD sensor too..
I use to have a shop SPC830 but sold it and I dont see too many of these.
thanks

The SPC PCU are a lot cheaper than the MPC!?

[davel]

The SPC PCU are a lot cheaper than the MPC!?

But he does not want to fit a new part.

[fshead]

Thanks I can buy from a dealer I use for parts local BUT they kill me on these bigger parts and I refuse to becomes partners with them on
what I can charge a customer...I can either rebuild some drum units with new fuji drums,drum blade,lub bar and pcr roller and cleaning roller and
pcr cleaning rollers.
I have a bunch of working pulls but dont really have a lot of free time...
BTW are these even easily available by RICOH?