Results 1 to 8 of 8
  1. #1
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,673
    Rep Power
    50

    SPC 830 DRUM/DEV UNIT

    HI
    I know this might be discussed before but I dont remember the answer.
    If I want to use a mpc3002 drum unit on the SPC830DN PRINTER is it just the drum face cover
    or do i have to swap out the TD sensor too..
    I use to have a shop SPC830 but sold it and I dont see too many of these.
    thanks

  2. #2
    Senior Tech 100+ Posts
    SPC 830 DRUM/DEV UNIT

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Roma
    Posts
    206
    Rep Power
    17

    Re: SPC 830 DRUM/DEV UNIT

    if I remember correctly, just cut a piece of the part where there is a metal inside the RJ45 to insert it

  3. #3
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,673
    Rep Power
    50

    Re: SPC 830 DRUM/DEV UNIT

    Quote Originally Posted by GIUBOSS View Post
    if I remember correctly, just cut a piece of the part where there is a metal inside the RJ45 to insert it
    thanks but i thought that cutting the corner was for swapping K DRUM FOR COLOR

  4. #4
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    10,187
    Rep Power
    229

    Re: SPC 830 DRUM/DEV UNIT

    Attached is the cheat sheet for modifications needed to use certain PCUs in others models. The modifications might also apply to the SPC 830.

    B2C_Drum_Cheat_Sheet_v2[1].pdf

  5. #5
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,673
    Rep Power
    50

    Re: SPC 830 DRUM/DEV UNIT

    I know I had a full set,low meter SPC830 I pulled but danm if i can find them.............

  6. #6
    Service Manager 2,500+ Posts
    SPC 830 DRUM/DEV UNIT

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    3,933
    Rep Power
    74

    Re: SPC 830 DRUM/DEV UNIT

    Quote Originally Posted by fshead View Post
    HI
    I know this might be discussed before but I dont remember the answer.
    If I want to use a mpc3002 drum unit on the SPC830DN PRINTER is it just the drum face cover
    or do i have to swap out the TD sensor too..
    I use to have a shop SPC830 but sold it and I dont see too many of these.
    thanks

    The SPC PCU are a lot cheaper than the MPC!?
    Let us eat, drink, and be merry, because tomorrow we may die!

    www.copierfirmware.co.uk

  7. #7
    Field Supervisor 500+ Posts
    Join Date
    Oct 2011
    Location
    Sydney
    Posts
    650
    Rep Power
    30

    Re: SPC 830 DRUM/DEV UNIT

    Quote Originally Posted by copier tech View Post

    The SPC PCU are a lot cheaper than the MPC!?
    But he does not want to fit a new part.

  8. #8
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,673
    Rep Power
    50

    Re: SPC 830 DRUM/DEV UNIT

    Thanks I can buy from a dealer I use for parts local BUT they kill me on these bigger parts and I refuse to becomes partners with them on
    what I can charge a customer...I can either rebuild some drum units with new fuji drums,drum blade,lub bar and pcr roller and cleaning roller and
    pcr cleaning rollers.
    I have a bunch of working pulls but dont really have a lot of free time...
    BTW are these even easily available by RICOH?

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here