Dislikes:
0
-
Re: sc 142
I have disconnect the SADF connector then turn on the machine and sc142 displayed again
-
Re: sc 142
The p[roblem is at exposure. First lubricate rails tec. Is scaner mooving smoothly?
What about sensor?
-
Re: sc 142
Could be a short circuit within the system. On a different machine, (MPC4501) i had these SC 1XX a couple of years back. I swapped most of the boards that are related to it in our workshop but couldn't fix. When I checked the service history, the last call was to replace the Transfer Assembly. Tech did not tighten the screw properly and was grounding the system. Had to tighten the screw and just like that, problem solved.
My 2 cents
Tags for this Thread
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules
Bookmarks