mp 6503 with j003 issue

[tonerhead]

Are you thinking of MP C6503? aren't the rollers different diameters.

Maybe I have the wrong number for the pickup roller, but if you skin it and put in the AF030049 roller on its hub, you will be surprised how much better it feeds. The other suggestions are great also like changing the torque limiter and all three rollers at once. But you did that with the new assembly. I would definitely try that AF030049 roller. It really is the roller that should be in there in the first place.

[totoro]

I went out there yesterday and found that when i manually lifted the tray the rear right side of tray was about 2mm lower than the front. i shimmed the rear as I could find nothing wrong with the cable or pulleys. I will update later as customer will run it for 4 hrs today doing their weekly job. Thanx to all for the responses.

[totoro]

J003 problem happened again. put in a new tandem right side tray. Hope this fixes it.