I have watched customer load paper in the tray and they do it better than I do. It has to be some mechanical problem that i'm missing, but thanx for the imput.
I have watched customer load paper in the tray and they do it better than I do. It has to be some mechanical problem that i'm missing, but thanx for the imput.
Totoro
"loneliness is an invention of the white man, when we are alone we talk to everything around us, we are never alone" (Ojibwa)
What you are missing is the rest of the 3 roller paper feed system. It is recommended the all three rollers be replaced new at the same time.
In normal operation the friction between the feed roller and separation (reverse) roller is greater than that of the torque limiter. This allows the feed roller to drive the separation roller in the feed direction. When either are worn the separation roller can slip against the fed roller and turn in the reverse direction. This causes the jam. Replacing just the separation roller usually corrects the problem for a couples of weeks at most.
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
I did not change just the sep roller. I put in a new feed unit .
Totoro
Pull out and remove left side of tandem tray so you can watch the feed operation. Here is what I have done on every last one of mine. I have skinned the rollers off of the hubs and substituted these. Pickup AF030049, Feed AF031098, Sep AF032098. What I found is the pickup roller tends to be the culprit. The AF030049 with the slots tends to kick the paper forward much better than the AF030090 original. Watch it and try it.
I've proved mathematics wrong. 1 + 1 doesn't always equal 2.........
Especially when it comes to sex
Please note tray 1 feed assy isn't the same as tray 2.
Any feed problems I also start with all 3 rollers and the limiter
If machine has done 700k you should replace by the way don't waste your time replacing one roller
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Sorry guys I thought you was talking about mpc6503 feed sections are the same on MP6503 series
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
Bookmarks