Will a MPC2503 fit inside a MPC3503?

[fshead]

ok thanks
i guess i will just have to pay up for some mpc3003 series to part out for drums/dev units and such.......
I dont like not having spares as free time to rebuild is never "free".

[copier tech]

ok thanks
i guess i will just have to pay up for some mpc3003 series to part out for drums/dev units and such.......
I dont like not having spares as free time to rebuild is never "free".

Before you order the PCU first try replacing just the charge roller this is a lot cheaper & does improve the print quality.

[HitMan]

You can swap the parts into the drum housing and it will work. Unsure of the dev unit though

Sent from my SM-G930F using Tapatalk

Apologies but I'm wrong about the c2503 fitting the c3503. The drum I'm sure is totally different. I was able to get the c2504 drum parts to fit in a c3503.

Sent from my SM-G930F using Tapatalk

[copier tech]

Apologies but I'm wrong about the c2503 fitting the c3503. The drum I'm sure is totally different. I was able to get the c2504 drum parts to fit in a c3503.

Sent from my SM-G930F using Tapatalk

The C2504 PCU is the same as the C2503 & WILL NOT fit in a C3503!

[HitMan]

The C2504 PCU is the same as the C2503 & WILL NOT fit in a C3503!

Yeah you can strip out the parts and use them. The lube bar is about half the size of the higher speed machines as obviously they only last about 60k.
They are completely different part numbers and are not the same

Sent from my SM-G930F using Tapatalk

[copier tech]

Yeah you can strip out the parts and use them. The lube bar is about half the size of the higher speed machines as obviously they only last about 60k.
They are completely different part numbers and are not the same

Sent from my SM-G930F using Tapatalk

There is no lube bar in the MPC2x03/MPC2x04 PCU !

[HitMan]

Alright then I'm talking shit

Sent from my SM-G930F using Tapatalk

[HitMan]

Maybe I was in some sort of alternate universe when I done it before

Sent from my SM-G930F using Tapatalk

[copier tech]

Alright then I'm talking shit

Sent from my SM-G930F using Tapatalk

lol the 60K PCU literally just have drum, blade, charge & cleaning rollers light as a feather compared to the C3003 & above PCU

[HitMan]

Ok

Sent from my SM-G930F using Tapatalk