Will a MPC2503 fit inside a MPC3503?

[fshead]

OK.
I know the mpc2503 is a cheap rate knockdown of the mpc3503.
And having little experience with these I am curious if I can use any parts in a pinch.
I was thinking of gutting a few cheap ones to use to rebuild drum and developer units with mpc3503
drum,drum blades,lub bar etc etc...Anyone try this?

[HitMan]

You can swap the parts into the drum housing and it will work. Unsure of the dev unit though

Sent from my SM-G930F using Tapatalk

[mga]

No parts are not the same come on guys do the job properly mpc2003 2503 pcu's only do 60k that's why the PCU is cheaper drum blade may be the same

[copier tech]

OK.
I know the mpc2503 is a cheap rate knockdown of the mpc3503.
And having little experience with these I am curious if I can use any parts in a pinch.
I was thinking of gutting a few cheap ones to use to rebuild drum and developer units with mpc3503
drum,drum blades,lub bar etc etc...Anyone try this?

The 2503 & 3503 are PCU & DEV are completely different not a single part is the same (apart from the screws!)

[skinnyb]

The 2503 & 3503 are PCU & DEV are completely different not a single part is the same (apart from the screws!)

Truth. The pcu and dev on the 2503 is rated for WAY less and designed so. I order the charge roller assy for the 35 and up by itself. Makes the drum go longer unless the lube bar is used up.

Sent from my LM-V405 using Tapatalk

[fshead]

The 2503 & 3503 are PCU & DEV are completely different not a single part is the same (apart from the screws!)

I know they are NOT EQUAL..
but can you take a drum unit,a ITB UNIT OR FUSER UNIT and pop it in a mpc3003?
I know the toner is the same although less.......
I can find cheap mpc2503 and the gut them for parts so i rebuild the drum units with higher life parts etc etc.........

[fshead]

Truth. The pcu and dev on the 2503 is rated for WAY less and designed so. I order the charge roller assy for the 35 and up by itself. Makes the drum go longer unless the lube bar is used up.

Sent from my LM-V405 using Tapatalk

as i dont see many mpc2503 s is it just the drum and the lub bar that will go at 60k?

[slimslob]

as i dont see many mpc2503 s is it just the drum and the lub bar that will go at 60k?

Most likely just the lube bar.

[fshead]

No parts are not the same come on guys do the job properly mpc2003 2503 pcu's only do 60k that's why the PCU is cheaper drum blade may be the same

i understand your reply i am trying to make mpc2503 EQUAL to mpc3003................
What i need to know like if i was on SURVIVOR what can i use on what i have.........
If the core is the same and i use high life drums,lub bars etc etc IS it worth it?

[copier tech]

as i dont see many mpc2503 s is it just the drum and the lub bar that will go at 60k?

There is no lube bar in the 20/25 series!

The drum cylinder is totally different the coating wears much faster than the 3/4/5/5 series.