Good morning, peeps.
I've been around a Pro8110 for a few days that randomly throws out the codes mentioned above - SC401-01, SC402-51 and SC410-01.
The developer was recently changed (now at about 123k prints) and I've followed the instructions on the RTBs related to these codes (SP modifications, doctor blade and mag roller cleaning).
The temperature/humidity around the machine is right now is 16ºC (60.8ºF) / 50% outside of the equipment (inside the same temp but 45% humidity).
The machine total counter is 809k.
I'm all out of ideas. I was thinking about what to replace next, but being that the machine is still below 1M copies, I'm not sure what...
Any tips?
Thanks.
Bookmarks