Page 1 of 2 12 LastLast
Results 1 to 10 of 17
  1. #1
    Technician
    Join Date
    Dec 2015
    Location
    Ankara
    Posts
    15
    Rep Power
    9

    Ricoh MP 7502 light copy and print quality

    I changed drum and developer but I still get light quality when I take print or copy. Anybody help me please?

  2. #2
    Field Supervisor 500+ Posts
    Join Date
    Oct 2011
    Location
    Sydney
    Posts
    689
    Rep Power
    31

    Re: Ricoh MP 7502 light copy and print quality

    What about the rest of the PM parts? Did you initialise dev correctly and clean everything first, was dev roller clean.

  3. #3
    Senior Tech 100+ Posts
    Ricoh MP 7502 light copy and print quality

    eccelobo's Avatar
    Join Date
    May 2013
    Location
    Buenos Aires
    Posts
    100
    Rep Power
    16

    Re: Ricoh MP 7502 light copy and print quality

    Quote Originally Posted by edi1907 View Post
    I changed drum and developer but I still get light quality when I take print or copy. Anybody help me please?
    Check transfer belt unit

  4. #4
    Trusted Tech 50+ Posts
    Join Date
    Oct 2007
    Location
    chardon, Ohio
    Posts
    78
    Rep Power
    26

    Re: Ricoh MP 7502 light copy and print quality

    Check that the dev and drum units are seated properly in place. If there’s too much of a gap cq will be light.

  5. #5
    Senior Tech 250+ Posts
    Ricoh MP 7502 light copy and print quality

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Roma
    Posts
    299
    Rep Power
    21

    Re: Ricoh MP 7502 light copy and print quality

    Quote Originally Posted by morgansterne View Post
    Check that the dev and drum units are seated properly in place. If there’s too much of a gap cq will be light.
    if this were the case, it would not be possible to insert them. They have obligatory pins.

  6. #6
    Senior Tech 250+ Posts
    Ricoh MP 7502 light copy and print quality

    GIUBOSS's Avatar
    Join Date
    Jul 2013
    Location
    Roma
    Posts
    299
    Rep Power
    21

    Re: Ricoh MP 7502 light copy and print quality

    suck the whole part around the drum including led lamps, filters, replace the other parts too see the pm counter list (at least those of the drum and transfer section) also clean the scanner section. Total number of pages? There are other posts on this classic problem with similar models.

  7. #7
    Field Supervisor 500+ Posts
    Ricoh MP 7502 light copy and print quality


    Join Date
    Nov 2007
    Location
    New Jersey
    Posts
    923
    Rep Power
    42

    Re: Ricoh MP 7502 light copy and print quality

    Quote Originally Posted by GIUBOSS View Post
    if this were the case, it would not be possible to insert them. They have obligatory pins.
    You can get them in there but not seated right, I have done it a few times. Definitely worth a look.

  8. #8
    Retired 10,000+ Posts slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    10,926
    Rep Power
    256

    Re: Ricoh MP 7502 light copy and print quality

    Quote Originally Posted by GIUBOSS View Post
    suck the whole part around the drum including led lamps, filters, replace the other parts too see the pm counter list (at least those of the drum and transfer section) also clean the scanner section. Total number of pages? There are other posts on this classic problem with similar models.
    Do not suck (vacuum) anywhere near the ID sensor as doing so can generate enough static to damage the sensor. You can vacuum most of the drum frame but stay at least 1 inch away from the sensor. Use an artist's brush to remove toner next to the sensor. Clean the face of the sensor itself with a soft cotton cloth moistened with water only, anything else can damage the sensor.

  9. #9
    Technician
    Join Date
    Dec 2015
    Location
    Ankara
    Posts
    15
    Rep Power
    9

    Re: Ricoh MP 7502 light copy and print quality

    Quote Originally Posted by eccelobo View Post
    Check transfer belt unit
    I changed transfer belt also but how could I make a mistake for this?

  10. #10
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,809
    Rep Power
    54

    Re: Ricoh MP 7502 light copy and print quality

    Quote Originally Posted by anothertech View Post
    You can get them in there but not seated right, I have done it a few times. Definitely worth a look.
    I agree as i have in the past too.

    would be nice if a little more info is given when seeking help.
    its like pulling teeth with some posters..........

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here