Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12
  1. #11
    Junior Member
    Join Date
    Nov 2019
    Rep Power

    Re: Mp 4002 printing light in parts that have a large toner area.

    Quote Originally Posted by zed255 View Post
    The fill is weak but there is a dark edge. I have seen this when the transfer assembly leads have been mixed up, the two connectors that connect to the belt assembly from the cleaning assembly. Make sure the bias leads are positioned correctly and if not sure there is no harm is swapping them for a test.

    This ended up being the solution, thank you!

  2. #12
    How'd ya manage that? 1,000+ Posts zed255's Avatar
    Join Date
    Dec 2009
    Rep Power

    Re: Mp 4002 printing light in parts that have a large toner area.

    Thanks for popping back in for an update. That really helps complete a thread and far too few seem to come back and post the final solution.
    One out of four people is mentally unbalanced.
    Think of your three closest friends...
    If they seem okay, then You're The One.

Tags for this Thread


Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=

IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here