Page 1 of 2 12 LastLast
Results 1 to 10 of 11
  1. #1
    Copier Technician 1,000+ Posts
    C/Q and errors related to mpc3003/4 to 6003/4 metis series

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,393
    Rep Power
    135

    C/Q and errors related to mpc3003/4 to 6003/4 metis series

    Hello gents ricoh technical are getting reports of this.

    If you find you have issues with colour alignment and random error codes after fitting the ITB belt D1776098 please try sourcing D1496097 (the older number
    Regards Mark

    FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

    RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

    https://copierservices.simdif.com

  2. #2
    Senior Tech 100+ Posts emiliorsg's Avatar
    Join Date
    Jul 2018
    Location
    Valencia
    Posts
    137
    Rep Power
    16

    Re: C/Q and errors related to mpc3003/4 to 6003/4 metis series

    I had problems with alignment before replace a ITB belt in a c2503 and it was solved with a ITB belt of a used machine.

  3. #3
    Professional Moron 2,500+ Posts TonerMunkeh's Avatar
    Join Date
    Apr 2008
    Location
    Shitsville, UK
    Posts
    3,852
    Rep Power
    108

    Re: C/Q and errors related to mpc3003/4 to 6003/4 metis series

    D2416097 is the latest part number.
    It's 106 miles to Chicago. We've got a full tank of gas, half a pack of cigarettes, it's dark and we're wearing sunglasses.

    Hit it.

  4. #4
    Copier Technician 1,000+ Posts
    C/Q and errors related to mpc3003/4 to 6003/4 metis series

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,393
    Rep Power
    135

    Re: C/Q and errors related to mpc3003/4 to 6003/4 metis series

    Quote Originally Posted by TonerMunkeh View Post
    D2416097 is the latest part number.
    Hi ricoh are saying this problem only happens when ordering new D1776098 all other part numbers should be ok that info was only posted last week on ricoh technical UK just passing the information on.
    Regards Mark

    FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

    RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

    https://copierservices.simdif.com

  5. #5
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: C/Q and errors related to mpc3003/4 to 6003/4 metis series

    Great trouble here to:
    mpc3004 registration problems...
    Seems that Ricoh had given the wronge number for the ITB belt AND the cl unit.
    I have replaced only the ITB cl unit on a c3004 (ricoh told me to use the imc3000 cl unit D0BQ6141);
    2 months later the original ITB belt on this machine was riped.
    So, i ordered a new belt, and ricoh says to use D1776089.
    But that doesn't fit at all, it is to width.

    So tommorrow i need to go back and put the whright parts in it!
    Hopfully the drums did not get damaged.

  6. #6
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: C/Q and errors related to mpc3003/4 to 6003/4 metis series

    Quote Originally Posted by Mark Bbb View Post
    Great trouble here to:
    mpc3004 registration problems...
    Seems that Ricoh had given the wronge number for the ITB belt AND the cl unit.
    I have replaced only the ITB cl unit on a c3004 (ricoh told me to use the imc3000 cl unit D0BQ6141);
    2 months later the original ITB belt on this machine was riped.
    So, i ordered a new belt, and ricoh says to use D1776089.
    But that doesn't fit at all, it is to width.

    So tommorrow i need to go back and put the whright parts in it!
    Hopfully the drums did not get damaged.
    The correct part of the mpc3004 ITB belt = D2416097

  7. #7
    Service Manager 5,000+ Posts
    C/Q and errors related to mpc3003/4 to 6003/4 metis series

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: C/Q and errors related to mpc3003/4 to 6003/4 metis series

    In the UK the complete ITB ass'y is not much more £ than just the belt so we always change the complete unit.


    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  8. #8
    Service Manager 1,000+ Posts
    Join Date
    Jun 2012
    Location
    Turnhout
    Posts
    1,662
    Rep Power
    48

    Re: C/Q and errors related to mpc3003/4 to 6003/4 metis series

    Quote Originally Posted by copier tech View Post
    In the UK the complete ITB ass'y is not much more £ than just the belt so we always change the complete unit.


    I think that is very wise.
    Because this belt is not so flexible at all, the least push will end up in a dent...
    And also there is not much space for the belt to pull it over the ass'y.
    And when you do, you need to be carrefull that it is located exactly between 2 plates, that means, before you even know it, its damaged!

  9. #9
    Service Manager 5,000+ Posts
    C/Q and errors related to mpc3003/4 to 6003/4 metis series

    copier tech's Avatar
    Join Date
    Jan 2014
    Location
    London
    Posts
    7,531
    Rep Power
    182

    Re: C/Q and errors related to mpc3003/4 to 6003/4 metis series

    Quote Originally Posted by Mark Bbb View Post
    I think that is very wise.
    Because this belt is not so flexible at all, the least push will end up in a dent...
    And also there is not much space for the belt to pull it over the ass'y.
    And when you do, you need to be carrefull that it is located exactly between 2 plates, that means, before you even know it, its damaged!

    Also the secret is to thoroughly clean the ITB unit drive rollers before you slide on the new belt. Even a light dusting of toner will cause the belt to slip very slightly causing colour mis reg issues.
    Let us eat, drink, and be merry, because tomorrow we may die!

    For all your firmware & service manual needs please visit us at:

    www.copierfirmware.co.uk - www.printerfirmware.co.uk




  10. #10
    Service Manager 1,000+ Posts luca72's Avatar
    Join Date
    Oct 2017
    Location
    Milano, Italia
    Posts
    1,346
    Rep Power
    69

    Re: C/Q and errors related to mpc3003/4 to 6003/4 metis series

    Quote Originally Posted by mga View Post
    Hello gents ricoh technical are getting reports of this.

    If you find you have issues with colour alignment and random error codes after fitting the ITB belt D1776098 please try sourcing D1496097 (the older number


    for now I have only changed two, and I have not had any problems, what problems does it have? slide on the rollers?
    "loneliness is an invention of the white man, when we are alone we talk to everything around us, we are never alone" (Ojibwa)

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here