you dont need a fuse.
you can make a reset jig using wire,a microswitch and connector from a thermistor mp5500.
But if you did not put unit together right then that needs to be checked/fixxed....
you dont need a fuse.
you can make a reset jig using wire,a microswitch and connector from a thermistor mp5500.
But if you did not put unit together right then that needs to be checked/fixxed....
i hear you.
Maybe in some parts of the world access to parts are limited/expensive?
I rather make a jig from scrap parts machines than pay $30 for a fuse that cost 30 cents to make.
Not everyone is equipped to rebuild a fuser unit,and maybe he is over his head here...THE fact
that it coded out AFTER he rebuilt it is a major red flag.....
Press the GREEN button!!
Bookmarks