Results 1 to 9 of 9
  1. #1
    Trusted Tech 50+ Posts
    Join Date
    Jul 2018
    Posts
    72
    Rep Power
    0

    MP 7503 poor mage density

    i have uneven density on printed paper,on left side lighter than the right side,any suggestion?can i increase the bias as in mp 2501,what the SP mode helps with that??


    thanks

  2. #2
    Retired 10,000+ Posts
    MP 7503 poor mage density

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: MP 7503 poor mage density

    A couple of potential problems.
    1. The MP 7503 is not level front to back. This causes uneven developer distribution. Use a bubble level and adjust the leveler.
    2. You have dust or toner on the laser shield glass. Take it out and clean it.

  3. #3
    Service Manager 10,000+ Posts
    MP 7503 poor mage density

    Phil B.'s Avatar
    Join Date
    Jul 2016
    Location
    Raleigh NC
    Posts
    22,669
    Rep Power
    659

    Re: MP 7503 poor mage density

    Quote Originally Posted by slimslob View Post
    A couple of potential problems.
    1. The MP 7503 is not level front to back. This causes uneven developer distribution. Use a bubble level and adjust the leveler.
    2. You have dust or toner on the laser shield glass. Take it out and clean it.
    +1 to Slim's suggestions

  4. #4
    Field Supervisor 500+ Posts
    Join Date
    Aug 2015
    Location
    Alexandroupolis, evros
    Posts
    584
    Rep Power
    0

    Re: MP 7503 poor mage density

    clean charge roller

  5. #5
    Retired 10,000+ Posts
    MP 7503 poor mage density

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: MP 7503 poor mage density

    Quote Originally Posted by Gab View Post
    clean charge roller
    MP 7503 is a Martini series machine. It uses a charge corona.

  6. #6
    Copier Technician 1,000+ Posts
    MP 7503 poor mage density

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,393
    Rep Power
    135

    Re: MP 7503 poor mage density

    Quote Originally Posted by Marwanalhajbi View Post
    i have uneven density on printed paper,on left side lighter than the right side,any suggestion?can i increase the bias as in mp 2501,what the SP mode helps with that??


    thanks
    Would be helpful to see some samples
    Regards Mark

    FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

    RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

    https://copierservices.simdif.com

  7. #7
    Copier Technician 1,000+ Posts
    MP 7503 poor mage density

    mga's Avatar
    Join Date
    Dec 2010
    Location
    london
    Posts
    1,393
    Rep Power
    135

    Re: MP 7503 poor mage density

    Quote Originally Posted by slimslob View Post
    MP 7503 is a Martini series machine. It uses a charge corona.
    Let's also say one of the best ricoh series copier ever made and still is
    Regards Mark

    FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.

    RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.

    https://copierservices.simdif.com

  8. #8
    Retired 10,000+ Posts
    MP 7503 poor mage density

    slimslob's Avatar
    Join Date
    May 2013
    Location
    Bakersfield, CA
    Posts
    34,132
    Rep Power
    989

    Re: MP 7503 poor mage density

    Quote Originally Posted by mga View Post
    Let's also say one of the best ricoh series copier ever made and still is
    The biggest problem I ever had with any of them keeping the ID sensor clean. There were 2 different part numbers for the drum cleaning brush. On some one worked better than the other. And of course the one-way gears on the paper feed units.

  9. #9
    Senior Tech 100+ Posts
    MP 7503 poor mage density

    eccelobo's Avatar
    Join Date
    May 2013
    Location
    Buenos Aires
    Posts
    112
    Rep Power
    25

    Re: MP 7503 poor mage density

    Quote Originally Posted by mga View Post
    Let's also say one of the best ricoh series copier ever made and still is
    But why they changed the transfer belt functioning? It lasts less than before!

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here