Anything new with setting up scan to folder on win 10?

[tsbservice]

One thing that might give you some time is to have them keep one of their Windows 7 Dells and use it as a scan server.

I like that idea...just wish it was mine

[slimslob]

I like that idea...just wish to was mine

to was or it was?

[tsbservice]

I like that idea...just wish to was mine

to was or it was?

Offtopic:
Hey slim, I don't know. I learned French in school and technical university(I hated it and still don't remember more than 10 French words) and English from Headway first few levels.
But I would edit my post for a good measure
Thanks for pointing me in right direction.

[rthonpm]

The latest firmware only mentions Windows 8 & Server 2012, however it may work with Windows 10.

Network Support v10.63
System/Copy v2.06 or later

The copier will need a local user to access. You can create one using Run > lusrmgr.msc or Control Panel > User Accounts > Manage User Accounts. (Location varies depending on the version of Windows). Make sure the user's password is set to not expire, and they have full read & write access to the folder in both Properties > Sharing > Advanced Sharing > Permissions and Properties > Security.

When adding the folder to the copier you will need to fully qualify the username in Folder Authentication, as PCNAME\username.

That firmware version does not add SMB2/3 support. It looks like only the MP xxx2 families and newer were upgraded to support newer SMB versions, with the MP 171 seeming to be the only outlier I've seen.

[anothertech]

That firmware version does not add SMB2/3 support. It looks like only the MP xxx2 families and newer were upgraded to support newer SMB versions, with the MP 171 seeming to be the only outlier I've seen.

What about the custom firmware that I posted about earlier in this thread? Sound like it might be what he needs?