Reset service mode

[mdfurqan2012]

I have a Ricoh mp5054sp having issue of entering service mode by it's default code 'reset,8,0,6,1,8,2,C', this model have an option to change that code and one of our technician change that and forget now we are unable to enter service mode.
Kindly guide me to reset that code to it's default code.
Thanks in advance

[ridgemill]

The SP5-081 only exists in standard SP Mode and not service, so you might be out of luck and require a new EEPROM/NVRAM.

Also, you could try the old combination to see if that was set instead.

[JayPaul]

I think I do know a way of doing it but i'm not going to say as punishment for you writing the ricoh sp code in a public forum for the whole world to see. Thanks to people doing that we already had to change the code once and we'll probably have it changed again.

[mga]

I have a Ricoh mp5054sp having issue of entering service mode by it's default code 'reset,8,0,6,1,8,2,C', this model have an option to change that code and one of our technician change that and forget now we are unable to enter service mode.
Kindly guide me to reset that code to it's default code.
Thanks in advance

You should really stay away from changing default service login as this give other engineers and next owner etc of the copiers. For the life of me why do people do this

[fshead]

I have a Ricoh mp5054sp having issue of entering service mode by it's default code 'reset,8,0,6,1,8,2,C', this model have an option to change that code and one of our technician change that and forget now we are unable to enter service mode.
Kindly guide me to reset that code to it's default code.
Thanks in advance

just do 5801-01 reset all...........
158 post and 0 rep.....................
ANOTHER LEACH

[copier tech]

I have a Ricoh mp5054sp having issue of entering service mode by it's default code 'reset,8,0,6,1,8,2,C', this model have an option to change that code and one of our technician change that and forget now we are unable to enter service mode.
Kindly guide me to reset that code to it's default code.
Thanks in advance

You can still use the 1,4,3 mode this can not be changed.

[slimslob]

You can still use the 1,4,3 mode this can not be changed.

But does not have access to change the standard SP access code.

[mdfurqan2012]

You can still use the 1,4,3 mode this can not be changed.

In 1,4,3 you can not access to sp 5081

[zed255]

I think copier tech was suggesting you simply rely on 'Factory Mode'. I do not agree with this suggestion.

The current SP mode can be read of NVRAM1 if you have an EEPROM reader compatible with the FM25 series chips. I would suggest reading it from an NVRAM > SD card backup, but you can't execute the NVRAM backup from Factory SP either. See this recent thread:

Finding previous tech SP access code

If you are really stuck then replacing the NVRAMs will be your only choice.

[mga]

Just replace nvram and setup