Page 2 of 2 FirstFirst 12
Results 11 to 15 of 15

Thread: 2550B

  1. #11
    Field Supervisor 500+ Posts
    2550B


    Join Date
    Oct 2007
    Location
    San Diego, CA
    Posts
    813
    Rep Power
    36

    Re: 2550B

    As was mentioned replace the toner tray and you do have to run developer initialization on these

  2. #12
    Service Manager 1,000+ Posts
    2550B


    Join Date
    Sep 2005
    Location
    South Jersey
    Posts
    2,239
    Rep Power
    78

    Re: 2550B

    Thanks everyone for the replies!

    I used the 1027 OEM units.

    Going there tomorrow and will try the suggestions. Will report back with what I found.

    Thanks again

  3. #13
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,807
    Rep Power
    54

    Re: 2550B

    I hate those drums and am glad i and my lungs dont do nor see them anymore..
    toner dumpamatics..........

    it is the one machine you need your shop vac to service..
    good luck

  4. #14
    How'd ya manage that? 1,000+ Posts zed255's Avatar
    Join Date
    Dec 2009
    Posts
    1,006
    Rep Power
    51

    Re: 2550B

    As others have suggested, the toner hopper assembly is likely leaking. I have found a really thorough cleaning is required to avoid other issues following a dumping hopper. I usually go as far as removing the laser assembly and right hand door assembly to get access to areas you will not otherwise be able to reach. If you don't bother, then the toner left behind will come back to haunt you in the future.
    Zed
    One out of four people is mentally unbalanced.
    Think of your three closest friends...
    If they seem okay, then You're The One.

  5. #15
    Service Manager 1,000+ Posts fshead's Avatar
    Join Date
    Jan 2009
    Location
    nyc
    Posts
    1,807
    Rep Power
    54

    Re: 2550B

    I AGREE pulling laser unit,blowing out fan,taking the drum mylar and cleaning it with water not windex or chemicals.
    I also try to reform that mylar back to where drum seals tight..
    The big issue is the dev unit has no room for change..
    Once drum gets weak dev unit will over compensate and dump toner
    into the dev chamber which has no room..then it goes everywhere where it should not...............

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Get the Android App
click or scan for the Copytechnet Mobile App

-= -= -= -= -=


IDrive Remote Backup

Lunarpages Internet Solutions

Advertise on Copytechnet

Your Link Here