Fiery FD3401 Ricoh 900

[joaodaffonsojr]

Hello !

I have 3 Fiery FD3401 Rip´s to bring back to life !
but i need help on this guys !
I got a image of the supposed install USB that has 4 folders

fd3401-01.png
I could make a image with usb USB Prep tool to generate this as install disk (usb thumb drive).

well it boots and goes to the process of instalation ...
But. .... (always but.. kkk) and it get´s in fase 4/5 of instalation it just show a green windows background.
and keep like that.
when i reset and boot it again, starts the fase 4/5 of instalation and just show a green windows background

well looks it´s missing something that I don´t have a aclue of what is.

my be a install disk2 ? (but never ask for that) ?

well guys any help... any manual in pdf ... any sign of smoke ... anything is very well appreciated.

thanks in advance !

[joaodaffonsojr]

some screens of the process....


001.jpg 1/5
002.jpg 2/5
003.jpg 3/5
004.jpg 4/5
005.jpg

Hello !

I have 3 Fiery FD3401 Rip´s to bring back to life !
but i need help on this guys !
I got a image of the supposed install USB that has 4 folders

fd3401-01.png
I could make a image with usb USB Prep tool to generate this as install disk (usb thumb drive).

well it boots and goes to the process of instalation ...
But. .... (always but.. kkk) and it get´s in fase 4/5 of instalation it just show a green windows background.
and keep like that.
when i reset and boot it again, starts the fase 4/5 of instalation and just show a green windows background

well looks it´s missing something that I don´t have a aclue of what is.

my be a install disk2 ? (but never ask for that) ?

well guys any help... any manual in pdf ... any sign of smoke ... anything is very well appreciated.

thanks in advance !

[TonerMunkeh]

Which controller is it? I can't see any reference to an FD3401.

[joaodaffonsojr]

Which controller is it? I can't see any reference to an FD3401.

hi !

I´m talking about this one:

IMG_20200226_144904_1.jpg

IMG_20200302_121414.jpg

[TonerMunkeh]

I have no idea lol I can't even see it on my-ricoh! Let me do some digging.

[joaodaffonsojr]

I have no idea lol I can't even see it on my-ricoh! Let me do some digging.

Jesus !!! kkkk

I´m still waiting for help !

thanks !

[Phil B.]

Jesus !!! kkkk

I´m still waiting for help !

thanks !

it's only been a few hours since OP...

relax

[TonerMunkeh]

I have drawn a total blank. Do any of these three boxes have a normal Fiery product number on them, i.e. E-41?

[joaodaffonsojr]

I have drawn a total blank. Do any of these three boxes have a normal Fiery product number on them, i.e. E-41?

Unfortunaly not.

I found a code in the motherboard:


R0367502 RICOH PROC900 PCB:FB13-L2

In one of the boxes i could print the add/remove programs
and see Fiery v3 ....

IMG_20200226_150551.jpg

[slimslob]

Unfortunaly not.

I found a code in the motherboard:


R0367502 RICOH PROC900 PCB:FB13-L2

It would have been nice if you had said Pro C900 instead of 900 right from the get go. It gives us the proper service manual to look in. Now if you can wait a couple days until one of decide to get back to your ignorance.