Thanks: 
Likes: using the document feeder the top copies are coming out lighter than the second side when printed. is there something that would be causing this. maybe need to clean the doc feeder.
ty you in advance
Heath
Dislikes: 0
using the document feeder the top copies are coming out lighter than the second side when printed. is there something that would be causing this. maybe need to clean the doc feeder.
ty you in advance
Heath
Originally Posted by heath03
MOIST PAPER..if 1st side is lite and duplex side is darker
open a new ream
i did that, the job started out good. a little lite on front side, but backs are good. just installed a new ricoh developer today
see pictures
New developer or new development unit? To my knowledge Ricoh does not sell just developer. Your samples look like either a dirty laser shield glass or dirty doctor blade.
Have you cleaned optics? If not should be first step for copying issues.
its a ricoh new unit. i have cleaned laser shield. maybe dr blade could be it
ty for tips
What is a "new unit?"
Does this machine have a single pass DF?
Does the issue only happen when using the DF?
What do the internal test prints look like on all colours?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
it only happens doc feeder, must be optics cleaning needed. prints perfect from thumb drive and from computer
ty for the help
Can not be new, and no none of those, if test prints are good, engine is good.
What is a "new unit?"
Does this machine have a single pass DF?
Let us eat, drink, and be merry, because tomorrow we may die!
For all your firmware & service manual needs please visit us at:
www.copierfirmware.co.uk - www.printerfirmware.co.uk
Reply With Quote
Bookmarks