Ricoh 3053, 3054 no print scan

[anothertech]

I would try a new hard drive, if still no good then controller PCB.

[mga]

I verified SP 5-985 set it to 1, there's only system sp under service mode. Thank you.

I would now try
Backup address book
Format hdd all in service mode
Clear nvram all BUT NOT 1 & 2
reboot machine

[CopyBats]

3 options that may be causing it .

1) If the machines were previously used with a fiery GW controller may be off.

Change the setting of SP5895-002 from "0" to "1".

2) Corrupted / defective hard drive. Format the HDD . Or it doesn't work swap with a hard drive you know that works

3) Defective Controller possibility

[davel]

Please confirm mode,l is it 3053 or 3054, they are completely different machines.