Please i need any driver helps me to print in banner mode
PCL6 driver only allows me to print in 487mm maximum
Not showing 120CM while the printer shows it
Please i need any driver helps me to print in banner mode
PCL6 driver only allows me to print in 487mm maximum
Not showing 120CM while the printer shows it
Last edited by Don3bdallah; 04-08-2020 at 09:13 AM.
All drivers except XPS support banner printing.
487.7mm is larger than 120mm.
It will require a Custom paper size be set. You will have to set the Custom Size.
my machine and driver setting
bypass.jpg
bypass.jpg
no sir the machine suppoert banner mode up to 1260mm
terramobil is correct. I just downloaded and installed the C5200 driver as well. You will have to use the bypass tray as the specs for the C5100 have to do with the the paper tray sizes. You will have to set up some means of properly supporting the banner as it is fed to keep it going straight and may not be able too stack multiple sheets.
If you plan to be printing a lot of banners, I would advise you get a wide format designed to actually do banners.
Regards Mark
FOR TRADE AND END USER SERVICE CALLS PLEASE VISIT WEB SITE FOR CONTACT DETAILS. COVERING GREATER LONDON {UK} AND ALL SURROUNDING COUNTIES.
RICOH, CANON, KYOCERA, KONICA, SHARP, HP/SAMSUNG BROTHER, LEXMARK.
https://copierservices.simdif.com
His image was so fuzzy that I didn't even notice that.
Universal print drivers were created for one reason only. Pooled printers when those printers are not all exactly the same make and model. In order for printer pooling to work, all printers in the pool MUST BE USING THE SAME DRIVER.
Nothing works PCL6 Drivers , Universl Drivers , C5200 Drivers even different version of windows 7&10
anybody have any idea what is the problem
Bookmarks